GE Monogram ZDP48N4G Installation Instructions Manual
48", 36", 30" professional ranges
Hide thumbs
Also See for Monogram ZDP48N4G:
- Owner's manual (46 pages) ,
- Installation instructions manual (16 pages) ,
- Use and care manual (36 pages)
Quick Links
See also:
Owner's Manual, Use and Care Manual
GE Monogram
®
Installation
Instructions
Professional
Ranges
48" Natural
Gas Models
ZDP48N4G
ZDP48N6R
ZDP48N6D
48" LP Gas Models
ZDP48L4G
ZDP48L6R
ZDP48L6D
36" Natural
Gas Models
ZDP36N6
ZDP36N4R
ZDP36N4D
36" LP Gas Models
ZDP36L6
ZDP36L4R
ZDP36L4D
30" Natural
Gas Modal
ZDP3ON4
30" LP Gas Modal
ZDP30L4
Related Manuals for GE Monogram ZDP48N4G
Summary of Contents for GE Monogram ZDP48N4G
- Page 1 GE Monogram ® Installation Instructions Professional Ranges 48" Natural Gas Models ZDP48N4G ZDP48N6R ZDP48N6D 48" LP Gas Models ZDP48L4G ZDP48L6R ZDP48L6D 36" Natural Gas Models ZDP36N6 ZDP36N4R ZDP36N4D 36" LP Gas Models ZDP36L6 ZDP36L4R ZDP36L4D 30" Natural Gas Modal ZDP3ON4 30"...
- Page 2 Service in Canada, Proper installation is the responsibility of the Call 1-888-880-3030. installer. Product failure due to improper installation is not covered under the GE For Monogram Parts and Accessories, call 1-800-626-2002. Appliance Warranty. See the Owner's Manual for details.
- Page 3 Order the model Available for your installation situation. 6 gas burners 48" Natural Gas Models: ZDP36N4R ZDP48N4G 4 gas burners and grill 4 gas burners, grill and griddle ZDP36N4D ZDP48N6R 4 gas burners and griddle 6 gas burners and grill 36"...
- Page 4 Design Information Pr@ssional Ranges Product Dimensions 1/4" & Clearances Optionalt 35-1/4"-30-3/4" 36"Wide RangeModels 48" Wide Range Models _29-1/16" 3-1/4" q_i 12" _ 12" Min to Combustibles 30" Min. High Without BackguardorO" 21-1/4" Shelf to Combustibles to Non-Combustible Wall with 1-1/2" Backguard 36" Min Combustibles LowBack 0"...
- Page 5 Design Information Pro/essional Ranges Product _27-3/8" Dimensions & Clearances" _High 36" Min. to Combustibles 21-1/4" Shelf LowBack 35-I/4"-36-8/4" o" Clearance 26-8/4" 9-7/B" --26-3/4'm --29-1/4" 43-7/8" 30" Wide Range Models Note: Refer to Vent Hoed Installation Instructions for hood height above 36"...
- Page 6 Design Information Pr@ssional Ranges Refer to "Dimensions and Clearances" Advance • Allow 36" min. above the cooking surface to combustible materials. appropriate placement and necessary clear- Planning • For 48" models, we recommend the vent ances when planning the installation. hood blower be 1200 CFM.
- Page 7 Installation Preparation Pro/essional Ranges Gas Supply: Pozogr 4" For30"/36"Models • The natural gas models are designed Supply 8"Models operate at 6" to 14" water column pressure. Locations • The liquid propane models are designed 12_Flex Line Supply ///t0 Range operate at 11 to 14"...
- Page 8 Installation Pro/essional Ranges DoorHingeRoller Before moving the range indoors: • Remove outer carton packing material from the shipping base. (Closed} Remove oven doors: • Open the door fully and hold down. KickPanel • Close the brass hinge latches to locked position on each side.
- Page 9 Installation Pr@ssional Ranges 36" and 48" Wide Models: • Remove the panel from the rear of the shipping pack. Lay the panel on the floor directly in front of the installation location. Pu¢_ilove The range should be placed on this panel to prevent damage to the floor.
- Page 10 Installation Pro/essional Ranges Small HoleForWood (2}Wood Screwsinto Installations(2Total) BackWall (All Installations) (2)LargeHolesFor Install ConcreteInstallations Sack Small HolesForWood Anti-Tip Wall installations(2 Total)\ Device (continued) Wood Slide __ Strip Dimension A=dels[V'o 112" 5/8" 1/4" ZDP48 ZDP36 ZDP30 \Dimension A Wood Construction: Concrete or Cement Construction: •...
- Page 11 Installation Pro/essional Ranges A manual shut-offvalve must be installed where Flexor RigidGas it will be accessible. gul_ Assure that gas is turned off at the shut-off valve. Connect • Remove all burner/hanger screws. • Lift and remove all open top burners/hangers Range to reveal the gas inlet location at the back of...
- Page 12 Installation Pro/essional Ranges Plug power cord into properly grounded receptacle. Connect Electrical • Carefully, slide the range into position. st° 7 careful not to entange power cord gas flexible tubing. • Be sure the right rear leg is engaged in the Slide the slot of the installed anti-tip...
- Page 13 Installation Pr@ssional Ranges • Replace the burner bowls and burner caps. • Adjustments should not be required, unless vibration during transit or variations in local _,__M Igniter Burner- gas supply make minor adjustments neces- ain Burner Assemble sary. ", enturi { rear) &...
- Page 14 Notes Pro[essional Ranges...
- Page 15 Notes Pro[essional Ranges...
- Page 16 NOTE: While perfolming installations describedin this book, safety glasses or gogglesshould beworn NOTE: Pioduct implovement is a colltlltIlilt,_ endeax at Ge_lel E]ect_i_ The_ _t<>] e, mate_ _aI_, a}_pearal_:e sl_e_ itleati_ fls aJ e Pub.No.49_8814-4 _u6}eet t_ _:hange without no_i,e Monogram: Dwg.No.