Table of Contents
Available languages
Available languages
Installation
Instructions
ISTEP 21 CONNECT ELECTRICAL
Verifg that power is turned
off at the source.
-A WARNING: Ifhouse wiring i snot
2-wire with a ground wire, an electrician
will need
to convert existing wiring to meet these specs.
When house wiring is aluminum,
be sure to
use U.L.-approved
anti-oxidant
compound
and aluminum-to-copper
connectors.
2. Place insert sleeve on padded, yet stable, surface
below cutout (can use flattened carton to pad
surface).
2. Remove the junction
box cover.
000'00
Wires
3. Pull house wires through wall of insert sleeve and
attach the strain relief. Thread the house wire
through the junction
box.
OOOOO
o
\
onnect
4. Connect white leads to branch circuit white lead.
5. Connect black leads to branch circuit black lead.
6. Connect green/yellow
leads to branch circuit green
lead.
7. Secure all connections
with wire nuts on each
electrical connector.
OOOO0
\
Cover
Screws
8. Carefully push wires into junction
box and replace
cover.
9. Secure junction
box cover with original screws.
18
Chapters
Table of Contents
