GE ZGG420LBPSS Datasheet
GE ZGG420LBPSS Datasheet

GE ZGG420LBPSS Datasheet

Natural/lp gas built-in outdoor grill
Hide thumbs Also See for ZGG420LBPSS:

Quick Links

ZGG420NBPSS - Natural Gas Built-in Outdoor Grill
ZGG420LBPSS - LP Gas Built-in Outdoor Grill
Dimensions and Installation Information (in inches)
12" Min. to Combustibles
4" Min. Clearance for Lid
to Non-Combustibles
*25-1/2"
Countertop Depth
27" to Front
of Control Panel
28-1/2" to Front of Bullnose
*The weight of the grill is fully supported by
the side trims. The back of the grill overlaps
the back edge of the cutout.
** Built-In Monogram Outdoor grills must use
Grill Liner accessory ZX42JR for 42" Built-in
to install into combustible enclosures. Please
refer Grill Liner instructions for the cut-out
dimensions.
For answers to your Monogram,
GE
appliance questions, visit our website at
®
geappliances.com or call GE Answer Center
service, 800.626.2000.
27"
41-7/8"
10-1/4" from
Bottom of
Support Flange
GE Profile
or
®
®
Outdoor Built-in Cooktop
These grills are designed to be installed into a non-
combustible enclousure.
To install into combustible enclosures Built-In
Monogram Outdoor grills must use Grill Liner
accessory ZX42JR for 42". Please refer to the
Grill Liner instructions for the details.
26"
• The grill drops into the opening and hangs from
the side flanges. It does not require support from
the bottom.
• The cutout must be completely covered with
non-combustible material such as stone, brick,
ceramic tile, concrete board, etc. The countertop
surface and edges must be flat and level.
• If the countertop has an overhang, it must be
notched or cut back flush with the front face of
the cabinet below.
• Allow at least 12" minimum clearance at the
back of the grill when the exhaust is directed to a
window or surface that is difficult to clean. Allow
at least 4" clearance behind the grill to allow the
hood lid to open. See notched detail below.
• Allow 12" minimum clearance on both sides
and the back of the grill to adjacent vertical
combustible construction.
• These gas grills cannot be used below any type of
overhead construction.
• These grills are designed for outdoor use only. Do
not locate the cooktop in a building, garage or
other enclosed or semi-enclosed area.
• Locate the backside of the grill away from
prevailing winds and avoid cooking in windy
conditions.
40-3/4"
24-1/2"
Grill Cutout
36"
1-1/8" Min.
Min.
Gas and
Electrical
Locations
10-7/8"
Opening
for Optional
Access Doors
Specification Revised 10/11
170132
loading

Summary of Contents for GE ZGG420LBPSS

  • Page 1 ZGG420NBPSS - Natural Gas Built-in Outdoor Grill ZGG420LBPSS - LP Gas Built-in Outdoor Grill Dimensions and Installation Information (in inches) 12" Min. to Combustibles 4" Min. Clearance for Lid to Non-Combustibles 27" *25-1/2" Countertop Depth 27" to Front of Control Panel 28-1/2"...
  • Page 2 ZGG420NBPSS - Natural Gas Built-in Outdoor Grill ZGG420LBPSS - LP Gas Built-in Outdoor Grill Dimensions and Installation Information (in inches) Built-in grill cut-out dimensions to install into combustible enclosures with grill liner accessory (not provided with built-in grill) Description Model 30"...
  • Page 3 ZGG420NBPSS - Natural Gas Built-in Outdoor Grill ZGG420LBPSS - LP Gas Built-in Outdoor Grill Features and Benefits • Heavy-duty, 304 stainless steel construction with professional styling complements Monogram ranges and other cooking products, allowing a seamless transition between indoor and outdoor spaces. A...

This manual is also suitable for:

Zgg420nbpss