HP 830 Series Configuration Manual page 225
Poe+ unified wired-wlan switch switching engine web-based
Hide thumbs
Also See for HP 830 Series:
- Configuration manual (177 pages) ,
- Command reference manual (136 pages) ,
- Installation manual (58 pages)
Table of Contents
Figure 191 Network diagram
NMS
Configuring Switch A
1.
(Optional.) Enable LLDP on GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2. (By default, LLDP
is enabled on Ethernet ports.)
2.
Set the LLDP operating mode to Rx on GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2:
a.
Select Network > LLDP from the navigation tree.
By default, the Port Setup tab is displayed, as shown in
b.
Select port GigabitEthernet1/0/1 and GigabitEthernet1/0/2.
c.
Click Modify Selected.
The page shown in
MED
GE1/0/1
GE1/0/2
GE1/0/1
Switch A
Figure 193
appears.
213
Switch B
Figure
192.
- Quick Links:
- Web Interface
Hide quick links:
Table of Contents
