Figure 54 Identify Device Information - Hitachi HTS541616J9AT00 - Travelstar 160 GB Hard Drive Specifications
2.5 inch ata/ide hard disk drive
Hide thumbs
Also See for HTS541616J9AT00 - Travelstar 160 GB Hard Drive:
- Install manual (2 pages) ,
- Datasheet (2 pages)
Table of Contents
63
0x07H
64
0003H
65
0078H
66
0078H
67
00F0H
68
0078H
69-79
0000H
80
00FCH
81
001AH
82
746BH
Note.1 The '*' mark in 'Content' field indicates the use of those parameters that are vendor specific.
Note.2 The feature marked '**' is able to be unsupported by the Device Configuration Overlay command.
Figure 54 Identify device information --- Continued ---
Travelstar 5K160 (PATA) Hard Disk Drive Specification
Multiword DMA Transfer Capability
15-11(=0) Reserved
7- 3 (=0) Reserved
Flow Control PIO Transfer Modes Supported
15- 8 (=0) Reserved
7- 0 (=3) Advanced PIO Transfer Modes Supported
Minimum Multiword DMA Transfer Cycle Time Per Word
15- 0 (=78h) Cycle time in nanoseconds (120ns, 16.6MB/s)
Manufacturer's Recommended Multiword DMA Transfer Cycle Time
15- 0 (=78h) Cycle time in nanoseconds (120ns, 16.6MB/s)
Minimum PIO Transfer Cycle Time Without Flow Control
15- 0 (=F0h) Cycle time in nanoseconds (240ns, 8.3MB/s)
Minimum PIO Transfer Cycle Time With IORDY Flow Control
15- 0 (=78h) Cycle time in nanoseconds (120ns, 16.6MB/s)
Reserved
Major version number
ATA-1,2.3 and ATA/ATAPI-4, 5, 6, 7
Minor version number -- ATA/ATAPI-7 T13 1532D revision 1 --
Command set supported
15 (=0) Reserved
14 (=1) 1=NOP command supported
13 (=1) 1=READ BUFFER command supported
12 (=1) 1=WRITE BUFFER command supported
11 (=0) Reserved
**10 (=1) 1=Host Protected Area Feature Set supported
9 (=0) 1=DEVICE RESET command supported
8 (=0) 1=SERVICE interrupt supported
7 (=0) 1=release interrupt supported
6 (=1) 1=look-ahead supported
5 (=1) 1=write cache supported
4 (=0) 1=supports PACKET Command Feature Set
3 (=1) 1=supports Power Management Feature Set
2 (=0) 1=supports Removable Media Feature Set
**1 (=1) 1=supports Security Feature Set
**0 (=1) 1=supports S.M.A.R.T Feature Set
106 / 188
10 1=Multiword DMA mode 2 is selected
9 1=Multiword DMA mode 1 is selected
8 1=Multiword DMA mode 0 is selected
2 1=Multiword DMA mode 2 is supported
1 1=Multiword DMA mode 1 is supported
0 1=Multiword DMA mode 0 is supported
'11' = PIO Mode 3 and 4 Supported
Hide quick links:
Table of Contents
