Zones Remaining Bypassed After Disarming - Honeywell VISTA-128BPTSIA User Manual

Commercial burglary partitioned security system with scheduling

Hide thumbs Also See for VISTA-128BPTSIA:

Table of Contents

Bypassing Protection Zones (cont'd)

Zones Remaining Bypassed After Disarming

The system provides an option to allow all manually bypassed zones to remain

bypassed upon disarming (security code + OFF) of the partition. This option must be

programmed by your installer. Check with your installer to see if this option has been

enabled.

NOTES:

For each partition in which the option is enabled, the security code + OFF will no

longer unbypass zones. To unbypass ALL zones you must enter your security code + #

+ 64. To unbypass zones INDIVIDUALLY, you must enter your security code + 6 +

zone number.

Any zone that was automatically bypassed by the system will be unbypassed upon

disarming the system (e.g. STAY mode, Auto-STAY, etc.).

Vent zones and zones bypassed by a programmed Auto-Bypass schedule (Tme Driven

Event) are considered "manual bypasses" and will not be unbypassed upon disarming

the system.

Zones that were in a bypassed state at the time a System Shutdown is sent from the

Compass Downloading software will be unbypassed when the System Shutdown is

removed.

– 32 –

Table of Contents