Control Knobs - GE J2S968 Owner's Manual

Care and cleaning of the range,

gecom

Be sure aft controls are off and all surfaces are cool before cleaning any part of the range.

If your range is removed for cleaning, servicing or any reason, be sure the anti-tip

device is reengaged properly when the range is replaced. Failure to take this

precaution could result in tipping of the range and cause injury.

How to Remove Protective Shipping Film and Packaging Tape

Caretully

grasp a corner

ol the protecti\'e

shipping

film with your finge_

and slowly

peel it fl'om the appliance

stmfi_ce. Do

not use any shaq) items to remove

the

film. Remove

all ot the fihn betore

using

the appliance

tot the fi_st time.

To assure no damage

is done to the

finish ot the product,

the satest way to

remove

the adhesive

fl'oin packaging

tape

on new appliances

is an application

of a

household

liquid dishwashing

detergent.

Apply with a soft cloth and allow to soak.

NOTE."Theadhesive must be removed from all

parts, it cannot be removed if it is baked on.

Control Knobs

Thecontrol knobsmay be removed for easier

cleaning.

Make sure the knobs are in the

OFF

positions

and pull them straight

off the

stems for cleaning.

The knobs can be cleaned

in a

dishwasher

or they may also be washed

with soap and wam_: Make sm'e the insides

ot the knobs are d_T betore

replacing.

Replace

the knobs in the OFF position

to

enstli'e

pi'oper

placelllent.

Burnercad

Burnerneau

Electrode _)

Burnerbase

CAUTION:DO NOT OPERATE THE

BURNER WlTHOUTALL BURNER

PARTSIN PLACE

Burner Assembly

The burner

assemblies

should

be washed

regularly

and, of com_e,

after spillove_.

Turnall controls off before removing burner parts.

The burner

grates, burner

heads and

btlFneI"

caps

can

be

i'ellloved

J[Oi" easy

cleaning.

The electrode

ot the spark igniter is

eN)osed

beyond

the suFlilce ot the

bm'ner

base. _._]_en cleaning

the cooktop,

be careflfl not to snag the electrode

ot

the spark igniter

with yore" cleaning

cloth. Damage

to the igniter

could occm:

Toavoid snagging a cloth on the spark

igniter, leave the burner heads in place

when cleaning the cooktop.

Be careflfl not to push in any cooktop

controls

while cleaning

the cooktop.

A slight electrical

shock might result

which could Catlse VOtl tO knock

over

hot cookware.

Wash burner

parts with an alli)ml)ose

non-abi_lsive

cleaner

and W_lliil watei:

Soak stubborn

soil. Dry them with a

cloth---

not reassemble

while wet.

To reassemble,

replace

the

burner

head

fi_t,

then

the burner

cap and

finally

the

burner

grate.

Be sure

the

pins

in the

burner

head

are properly

located

in the

btlFner

base

holes.

29