Table of Contents
RASMan Configuration File
RASMan application settings are stored in the Settings section of
(see page 2-2) to change the values in the RASMan.exm file.
Key
AudioNotification
AutoConnectOnDock
AutoConnectOnStart
up
Connectoid
CommandLine
CommandArgs
ConnectDelay
Debug
DisableActiveSync
6 - 12
Description
Enable and disable audio
notifications on connecting and
disconnecting.
Connects and disconnects RASMan
when the terminal is docked and
removed from the communication
peripheral.
Controls the automatic connection
when RASMan is started.
RASMan attempts to connect only if
the device is docked and AC power
is detected.
Indicates the connection RASMan
should use.
Command to execute on a
successful connection.
Command arguments for the
CommandLine setting.
Specifies the amount of time to wait
before establishing the PPP
connection after RASMan is
started.
Enables and disables the creation
of a debug log file.
Disables the ActiveSync connection
when RASMan is running.
\IPSM\RASMan.exm
Default
Available Values
Value
1
0=Disable
1=Enable
1
0=Disabled; RASMan connection
must be launched manually when
the terminal is docked.
1=RASMan connects on an AC
power event.
2=RASMan connects on RS-232/
USB connection.
1
0=Disabled; the PPP connection is
not established when RASMan is
started.
1=Enabled; the PPP connection is
established when RASMAN is
started.
`USB
`USB Connection
`115200 Default
Connectio
`19200 Default
n
`38400 Default
`57600 Default
These values must be typed in
exactly as they appear here.
Empty
Leave empty if no action is required.
Empty
Leave empty if no action is required.
2000
Enter values in milliseconds.
0
0=Disabled; no log file
1=Enabled; Creates a log file of
RASMan activity in the \IPSM
folder.
1
0=Disabled; ActiveSync runs while
RASMan is running.
1=Enabled; the ActiveSync
connection is disabled while
RASMan is running.
. Use
EZConfig Editor
Hide quick links:
Table of Contents
