Table of Contents
RASMan
RASMan establishes a PPP (Point-to-Point Protocol) connection with a RAS server.
Note:
RASMan is not supported on the Dolphin 7850 and the Dolphin 6100/6500/7600.
To Enable RASMan
1. Tap Start > Power Tools. The
2. Click the RASMan icon once
the
When RASMan is enabled, the RASMan icon appears in the Command bar at the bottom of the
Today screen . Tap this icon to open the Command bar menu.
Note:
To start RASMan automatically after each hard reset, enable the RASMan Program section of the
Autorun.exm File
To Disable RASMan
Navigate to the
Dolphin Power Tools Main Window
OR
Select Exit on the
Command Bar Menu
Command Bar Menu
When RASMan is enabled, the RASMan icon appears in the Command bar at the bottom of the Today
screen
. Tap this icon to open the Command bar menu.
Menu Item
Selecting this item ...
Auto Connect
This item is selected by default. It means that the terminal is connected to the RAS server
via PPP.
Connect
Re-establishes the PPP connection if it was disconnected.
Disconnect
Disconnects the PPP connection.
About
Displays version and description information about RASMan.
Exit
Disables RASMan; the icon no longer appears in the Command bar.
Dolphin Power Tools Main Window
. The PPP connection is established according to the settings in
(see page 4-1).
(page 6-11).
(see page 1-2) appears.
(see page 6-11).
(see page 1-2) and tap the RASMan icon again.
6 - 11
Hide quick links:
Table of Contents
