Installing A Slotless Scsi Module Upgrade Kit - HP DL320 - ProLiant - G3 Setup And Installation Manual

Hp proliant dl320 generation 2 server setup and installation guide

Hide thumbs Also See for DL320 - ProLiant - G3:

User manual (119 pages)

Maintenance and service manual (83 pages)

Quickspecs (43 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

Table of Contents

IMPORTANT: Always populate hard drive bays starting with the lowest SCSI ID number.

NOTE: Refer to the documentation shipped with the hard drive to determine how to set the

jumpers on the SCSI hard drives.

To install SCSI hard drives:

1. Install the SCSI module card as described in the following "Installing a Slotless

SCSI Module Upgrade Kit" section of this chapter.

2. Install hard drives following steps 1 through 9 in the "Installing ATA Hard

Drives" section earlier in this chapter.

3. Connect the SCSI cable and the hard drive power cable to the SCSI hard drives.

Refer to the following "Installing a Slotless SCSI Module Upgrade Kit" section.

IMPORTANT: When connecting the power cable to the hard drives, be sure that the

connectors are installed with the red wire facing right (as viewed from the front of the

server).

4. Set the jumpers for the SCSI device. Refer to the instructions that shipped with

the SCSI hard drive.

5. Reverse the steps in "Accessing Internal Server Components" earlier in this

chapter.