Step 2 - Install Safe
1.
Install your wall safe into the wall cutout so that the hinge side of the safe is
flush against the right hand stud and the front flange is flat against the wall.
With the safe door open, extend the telescoping back by pushing it from
the inside until maximum possible depth is achieved. Once the back is
extended, install six wood screws (included) through the pre-drilled holes in
right hand side of safe and into stud. Tighten safe flush to stud. Do not over
tighten screws.
2.
Now install six screws (included) through the pre-drilled holes in left hand side
of safe and into stud. Do not over tighten.
NOTE: There may be a slight amount of space between the safe side wall
and the left hand stud, this is normal. The right hand hinged side of your wall
safe must be tightened flush to the right hand stud.
Once safe has been placed into position in the wall cutout,
secure into place by screwing 4 wood screws (included) through
the four recessed holes in the front flange of Safe and into studs.
Tighten screws flush with flange.
3.
Select the expandable shelf extensions that will work best with
the depth of the installed safe and using small screws and nuts,
secure into place.
Home and Office Security Safes
Installing Your Wall Safe
5
Hide quick links:
