HP StorageWorks 1510i - Modular Smart Array Release Note
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Storage
  5. StorageWorks 1510i - Modular Smart Array
  6. Release note
HP StorageWorks 1510i - Modular Smart Array Release Note

HP StorageWorks 1510i - Modular Smart Array Release Note

Modular smart array firmware 2.0
Hide thumbs Also See for StorageWorks 1510i - Modular Smart Array:
1
2
3
4
5
6
7

Quick Links

See also: Service Manual, User Manual
HP StorageWorks 1510i Modular Smart
Array firmware 2.0 release notes
Part number: 431339–001
First edition: June 2008
loading

Related Manuals for HP StorageWorks 1510i - Modular Smart Array

Summary of Contents for HP StorageWorks 1510i - Modular Smart Array

  • Page 1 HP StorageWorks 1510i Modular Smart Array firmware 2.0 release notes Part number: 431339–001 First edition: June 2008...

  • Page 3: Product Models

    Version: Description MSA1510i Active/Active controller firmware version 2.0 Update recommendation Recommended for all MSA1510i configurations, both single-controller and dual-controller. Supersedes All previous firmware versions. Product models HP StorageWorks 1510i Modular Smart Array (MSA1510i) Devices supported For a list of supported servers, hard drive storage enclosures, and other network components, navigate to the MSA1510i QuickSpecs on the MSA family website: http://www.hp.com/go/msa.
  • Page 4 • show portal_group • show iscsi_keys • show initiator • Added the following CLI command enhancements, adding the following new commands for Active/Active: • show preferred_path; set preferred_path • show auto_path_change; set auto_path_change • show proxystats • show taskstats • Added the following ADU enhancements: •...

  • Page 5: Installation Instructions

    Important notes and service considerations To install the firmware, use the procedures and instructions provided in these instructions and on the MSA1510i Support CD, version 2.0. An ISO image of the CD is available on the MSA1510i support page: http://www.hp.com/support. Please note the following: •...
  • Page 6 Update the firmware using the HP Storage Management Utility (SMU): a. Point your browser to and open the SMU. b. Select the Configure tab. Select Controller (Active) > Flash Firmware. d. Click Browse, navigate to the location of the previously downloaded MSA20 firmware image file, and then select OK.
  • Page 7 In the SMU, select Storage System > Reset System to restart the MSA1510i. IMPORTANT: In dual controller configurations, the second controller MUST be updated to the same image to complete the update cycle. When the system is restarted, the new firmware will automatically be cloned from the just-updated controller over to the other controller.