Removing And Replacing The System Board - HP Vectra VEC 7 Supplementary Manual

Hide thumbs Also See for Vectra VEC 7:

Table of Contents

Before Replacing the

System Board

Replacing the System

Board

Removing and Replacing the System Board

Before replacing the system board:

• Check that the latest driver versions have been installed.

• Check that the latest BIOS version has been installed.

• Check that the problem isn't described in the product bug list.

• Make sure that you are electrostatically grounded.

1 Remove the cover.

2 Remove the power supply unit (minitower models only).

3 Disconnect all cables (power, data, etc.) from the system board.

4 Remove the seven retaining screws from the system board.

Back of PC

5 Remove the system board from the PC.

6 Carefully insert the new system board in the PC.

7 Replace the retaining screws.

8 Reconnect the various cables.

9 Replace the power supply unit (if necessary).

10 Replace the cover.

System

Board

Front of PC

7 Retaining

Screws