Minitower Models - HP Vectra VEC 7 Supplementary Manual

Hide thumbs Also See for Vectra VEC 7:

Table of Contents

Removing the Cover

3 Tighten the three thumb screws at the back of the PC.

4 Reconnect all cables and power cords.

Minitower Models

1 Switch off the display and PC.

2 Disconnect all power cords and any telecommunications cables.

3 Unscrew the three thumb screws at the back of the PC. If it is the first time

you are removing the cover, you will probably need to use a screwdriver

to loosen the screws.

4 While standing at the back of the PC, slide the cover towards you by about

15 mm (1/2 - 3/4 inch) and then lift it off the PC chassis.

Step 2

Step 3

Removing and Replacing the Cover