Related Manuals for HP 3C339
Summary of Contents for HP 3C339
- Page 1 TokenLink Velocity PCI Network Interface Card 3C339 Installation Guide...
- Page 2 Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
- Page 3 • Full Duplex Procedure 1 With the HP Vectra VE7/VE8 set to PNP enabled, turn the machine off install the 3COM 3C339 adapter card into an PCI slot. 2 Power on the machine and allow it to boot to a DOS prompt.
- Page 4 3Com Fast Etherlink/Etherlink III Bus Master 9 Under the heading “Select the driver for your network board”, insert the 3Com 3C339 drivers disk and set the path to “A:\NETWARE\CLIENT.” (If you have an HP preloaded HDD, set path to “C:\Masters\LanDrv\3C339\NWCLIENT\) 10 Press “Enter”...
- Page 5 8 Double click on “Network” and select “Add.” 9 Choose to add an adapter, click on “Add” then on “Have Disk.” 10 Insert the 3C339 drivers diskette and set path to “A:\” and hit Enter. 1 Connecting to a Netware 3.12 Server...
- Page 6 1 Connecting to a Netware 3.12 Server Windows 95 SR2 (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:\MASTERS\LANDRV\3C509B\”) 11 Highlight the adapter labeled “3Com Token Ring in PCI Mode” and press “OK.” 12 At the “Network” dialogue box, click on the “Identification” folder. 13 Enter your “Computer Name,”...
- Page 7 • Full Duplex Procedure 1 With the HP Vectra VE7/VE8 set to PNP enabled, turn the machine off install the 3COM 3C339 adapter card into an PCI slot. 2 Power on the machine and allow it to boot to a DOS prompt.
- Page 8 3Com Fast Etherlink/Etherlink III Bus Master 9 Under the heading “Select the driver for your network board”, insert the 3Com 3C339 drivers disk and set the path to “A:\NETWARE\CLIENT.” (If you have an HP preloaded HDD, set path to “C:\Masters\LanDrv\3C339\NWCLIENT\) 10 Press “Enter”...
- Page 9 Plug and Play Compatibility • Full Duplex Procedure 1 With the HP VE7/VE8 turned off install the 3COM 3C339 adapter card into an PCI slot. 2 Power on the machine and restart Windows 95 SR2 in MS-DOS Mode. 3 Insert the 3COM drivers diskette (downloaded from 3COM’s website) and execute 3C3X9CFG.EXE.
- Page 10 2 Connecting to a Netware 4.11 Server Windows 95 SR2 10 Insert the 3C339 drivers diskette and set path to “A:\” and hit Enter. (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:\MASTERS\LANDRV\3C509B\”) 11 Highlight the adapter labeled “3Com Token Ring in PCI Mode”...
- Page 11 • Interrupt Request Level Procedure 1 With the HP Vectra VE7/VE8 set to PNP enabled, turn the machine off install the 3COM 3C339 adapter card into an PCI slot. 2 Power on the machine and allow it to boot to a DOS prompt.
- Page 12 Windows for Workgroups Ver. 3.11 C:\WINDOWS 9 Under the heading “Select the driver for your network board”, insert the 3Com 3C339 drivers disk and set the path to “A:\NETWARE\CLIENT.” (If you have an HP preloaded HDD, set path to “C:\Masters\LanDrv\3C339\NWCLIENT\) 10 Press “Enter”...
- Page 13 • Plug and Play Compatibility • Full Duplex Procedure 1 With the HP Vectra VE7/VE8 turned off, install the 3COM Token Ring 3C339 adapter card into an PCI slot. 2 Connect network cable media to the 3COM 3C339 card. 3 Insert a DOS bootable diskette and power on the machine.
- Page 14 “Add.” 12 Click on “Have Disk” in the “Select Network adapters” dialog box. 13 Insert the 3COM Software “Etherlink 3C339 Token Ring Drivers ” disk into the floppy drive. 14 With the Path set to “A:\” in the “Install From Disk” dialog box click “OK”.
- Page 15 • Plug and Play Compatibility • Full Duplex Procedure 1 With the HP Vectra VE7/VE8 turned off, install the 3COM Token Ring 3C339 adapter card into an PCI slot. 2 Connect network cable media to the 3COM 3C339 card. 3 Insert a DOS bootable diskette and power on the machine.
- Page 16 (If you have an HP preloaded HDD, set path to “C:\Masters\LanDrv\3C339\) 16 Select “3Com Token Ring 3C339 Adapter” in the Select OEM Option dialog box, and click “OK”. 17 Click on the “OK” button in the “Bus Location” dialog box.
- Page 17 • Plug and Play Compatibility • Full Duplex Procedure 1 With the HP Vectra VE7/VE8 turned off, install the 3COM Token Ring 3C339 adapter card into an PCI slot. 2 Connect network cable media to the 3COM 3C339 card. 3 Insert a DOS bootable diskette and power on the machine.
- Page 18 14 Set the path to “A:\” in the “Insert Disk“ dialog box, and then insert the 3COM 3C339 drivers disk. 15 Click “OK” at the “Install Driver” dialog box. (If you have an HP preloaded HDD, set path to “C:\Masters\LanDrv\3C339\) 16 Select “3Com Token Ring 3C339 Adapter”...
- Page 19 • Interrupt Request Level Procedure 1 With the HP Vectra VE7/VE8 set to PNP enabled, turn the machine off install the 3COM 3C339 TR adapter card into a PCI slot. 2 Power on the machine and allow it to boot to a DOS prompt.
- Page 20 Windows for Workgroups Ver. 3.11 C:\WINDOWS 9 Under the heading “Select the driver for your network board”, insert the 3Com 3C339 drivers disk and set the path to “A:\NETWARE\CLIENT.” (If you have an HP preloaded HDD, set path to “C:\Masters\LanDrv\3C339\NWCLIENT\) 10 Press “Enter”...
- Page 21 • Plug and Play Compatibility • Full Duplex Procedure 1 With the HP Vectra VE7/VE8 turned off, install the 3COM Token Ring 3C339 adapter card into an PCI slot. 2 Connect network cable media to the 3COM 3C339 card. 3 Insert a DOS bootable diskette and power on the machine.
- Page 22 “Add.” 12 Click on “Have Disk” in the “Select Network adapters” dialog box. 13 Insert the 3COM Software “Etherlink 3C339 Token Ring Drivers ” disk into the floppy drive. 14 With the Path set to “A:\” in the “Install From Disk” dialog box click “OK”.
- Page 23 • Plug and Play Compatibility • Full Duplex Procedure 1 With the HP Vectra VE7/Vectra VE8 turned off, install the 3COM Token Ring 3C339 adapter card into an PCI slot. 2 Connect network cable media to the 3COM 3C339 card.
- Page 24 14 Set the path to “A:\” in the “Insert Disk“ dialog box, and then insert the 3COM 3C339 drivers disk. 15 Click “OK” at the “Install Driver” dialog box. (If you have an HP preloaded HDD, set path to “C:\Masters\LanDrv\3C339\) 16 Select “3Com Token Ring 3C339 Adapter”...
- Page 25 • Plug and Play Compatibility • Full Duplex Procedure 1 With the HP Vectra VE7/VE8 turned off, install the 3COM Token Ring 3C339 adapter card into an PCI slot. 2 Connect network cable media to the 3COM 3C339 card. 3 Insert a DOS bootable diskette and power on the machine.
- Page 26 14 Set the path to “A:\” in the “Insert Disk“ dialog box, and then insert the 3COM 3C339 drivers disk. 15 Click “OK” at the “Install Driver” dialog box. (If you have an HP preloaded HDD, set path to “C:\Masters\LanDrv\3C339\) 16 Select “3Com Token Ring 3C339 Adapter”...
- Page 27 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0...
- Page 28 4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0...
- Page 30 Version Number 3COM 339 Rev.1...