1. Manuals
  2. Brands
  3. HP Manuals
  4. Switch
  5. 438031-B21 - 1:10Gb Ethernet BL-c Switch
  6. Command reference manual

Operations-Level Port Options; Operations-Level Port 802.1X Options - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Command Reference Manual

Hp 1:10gb ethernet bl-c switch for c-class bladesystem command reference guide
Hide thumbs Also See for 438031-B21 - 1:10Gb Ethernet BL-c Switch:
Table of Contents

Operations-level port options

Command: /oper/port
[Operations Port 1 Menu]
Operations-level port options are used for temporarily disabling or enabling a port.
Operations-Level Port Menu options
Table 183
Command
8021x
rmon disable|enable
ena
dis
cur

Operations-level port 802.1x options

Command: /oper/port /8021x
[802.1x Operation Menu]
Operations-level port 802.1x options are used to temporarily set 802.1x parameters for a port.
Operations-Level Port 802.1x Menu options
Table 184
Command
reset
reauth
8021x
- 8021.x Menu
rmon
- Enable/Disable RMON for port
ena
- Enable port
dis
- Disable port
cur
- Current port state
Description
Displays the 802.1x Port Menu.
Enables or disables Remote Monitoring for the port. RMON must be enabled for any
RMON configurations to function.
Temporarily enables the port. The port will be returned to its configured operation
mode when the switch is reset.
NOTE:
This command does not enable a port that has been disabled by an ekeying
mismatch error.
Temporarily disables the port. The port will be returned to its configured operation
mode when the switch is reset.
Displays the current settings for the port.
reset
- Reinitialize 802.1x access control on this port
reauth
- Initiate reauthentication on this port now
Description
Re-initializes the 802.1x access-control parameters for the port. The following actions take
place, depending on the 802.1x port configuration:
force unauth—the port is placed in unauthorized state, and traffic is blocked.
auto—the port is placed in unauthorized state, then authentication is initiated.
force auth—the port is placed in authorized state, and authentication is not required.
Re-authenticates the supplicant (client) attached to the port. This command only applies if
the port's 802.1x mode is configured as auto.
Operations Menu
191
Show Quick Links

Hide quick links:

Table of Contents
loading

Related Manuals for HP 438031-B21 - 1:10Gb Ethernet BL-c Switch

Related Content for HP 438031-B21 - 1:10Gb Ethernet BL-c Switch

This manual is also suitable for:

1:10gbe

Table of Contents