Rip Route Redistribution Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Command Reference Manual
Hp 1:10gb ethernet bl-c switch for c-class bladesystem command reference guide
Hide thumbs
Also See for 438031-B21 - 1:10Gb Ethernet BL-c Switch:
- Reference manual (252 pages) ,
- Application manual (195 pages) ,
- Cli reference manual (190 pages)
Table of Contents
Table 132
RIP Interface Configuration Menu options
Command
poison disable|enable
split disable|enable
trigg disable|enable
mcast disable|enable
default
none|listen|supply|both
metric <1-15>
auth none|password
key
enable
disable
cur
RIP Route Redistribution configuration
Command: /cfg/l3/rip/redist fixed|static|ospf|eospf
[RIP Redistribute Fixed
The following table describes the RIP Route Redistribute Menu options.
RIP Redistribute Configuration Menu options
Table 133
Command
add <1-32> <1-32>|all
Description
When enabled, the switch uses split horizon with poisoned reverse. When
disabled, the switch uses only split horizon. The default value is disabled.
Enables or disables split horizon. The default value is enabled.
Enables or disables Triggered Updates. Triggered Updates are used to speed
convergence. When enabled, Triggered Updates force a router to send update
messages immediately, even if it is not yet time for the update message. The
default value is enabled.
Enables or disables multicast updates of the routing table (using address
224.0.0.9). The default value is enabled.
When enabled, the switch accepts RIP default routes from other routers, but
gives them lower priority than configured default gateways. When disabled, the
switch rejects RIP default routes. The default value is disabled.
Configures the route metric, which indicates the relative distance to the
destination. The default value is 1.
Configures the authentication type. The default is none.
Configures the authentication key password.
Enables this RIP interface.
Disables this RIP interface.
Displays the current RIP configuration.
add
- Add rmap into route redistribution list
rem
- Remove rmap from route redistribution list
export
- Export all routes of this protocol
cur
- Display current route-maps added
Description
Adds selected routing maps to the RIP route redistribution list. To add all the 32
route maps, enter all. To add specific route maps, enter routing map numbers
one per line, NULL at the end.
This option adds a route map to the route redistribution list. The routes of the
redistribution protocol matched by the route maps in the route redistribution list
will be redistributed.
Menu]
Configuration Menu
154
- Quick Links:
- Establishing a Console Connection
Hide quick links:
Table of Contents
