Attaching The Appliance To The Top Of The Cavity; Checking That The Finger Guard Moves Easily - Bosch B36ET71SNS - 36" Built in Bottom-Free Installation Instructions Manual
Installation instructions
Hide thumbs
Also See for B36ET71SNS - 36" Built in Bottom-Free:
- Brochure (138 pages) ,
- Use & care manual (88 pages)
Table of Contents
Available languages
Available languages
Unscrew the height-adjustable feet until the mark on
the base has reached the indicated guide dimension
1
(1
/
" / 32 mm).
4
NOTE
It is very important to comply with this dimension for
the subsequent alignment of the furniture fronts.
Align the furniture fronts with the spirit level.
Before attaching the appliance in the cavity, check that
the finger guard functions by opening and closing the
two refrigerator compartment doors several times.
12. Attaching the appliance to the top of
the cavity
Screw the attachment plate lugs (top) to the overhead
furniture/fixtures.
Fix the attachment plate side lugs (top) depending on
the installation situation. If there is no gap or only a slight
gap, it is not necessary to fix the side lugs.
If there is a fairly large gap above the appliance, fit a
wooden beam above the appliance, ensuring that the
wooden beam fits the gap exactly.
Attach the cover strip to the attachment plate (top).
Shorten the fitting strip to the required height!
13. Checking that the finger guard
moves easily
It is now essential to check that the finger guard moves
easily. At a later time any required corrections will be more
difficult.
Push the finger guard on the hinge side into the gap
between the appliance and cavity wall.
It must be possible to push in and pull out the finger
guard easily!
19
Chapters
Table of Contents
