Installing a CD/DVD Drive
Unpack the drive and prepare it for installation.
1
Check the documentation that accompanied the drive to verify that the drive is configured for
your computer. Configure the drive for the cable select setting.
Connect the CD/DVD drive cables to the drive.
2
Lower the drive into the drive bracket and align the two drive bracket tabs with the holes on the
3
side of the drive. Then attach the two screws to the side to secure it.
Gently position the drive until it clicks into place.
4
184
1
screws (2)
2
drive bracket
3
CD/DVD drive
4
CD/DVD drive cable
1
2
1
CD/DVD drive
2
CD/DVD drive cable
3
screws (2)
4
drive bracket
5
alignment tabs (2)
3
4
5