Showing Routes Between Two End-Products; Requirements; Product Status Icons - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual
Fw v06.xx/hafm sw v08.02.00 hp storageworks ha-fabric manager user guide (aa-rs2ce-te, july 2004)
Hide thumbs
Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
- Service manual (322 pages) ,
- User manual (300 pages) ,
- Reference manual (214 pages)
Table of Contents
Table 5: Product Status Icons
No icon
To see a list of all products requiring attention, click the Attention Indicator icon
(
) on the Status bar at the bottom of the main window. The Service Request
dialog box displays the names and IP addresses of devices needing attention.
Click a product name hyperlink to jump to the product on the Physical Map. The
list updates dynamically.
Showing Routes Between Two End-Products
Note:
products.
You can use the Show Route feature to view the path that Fibre Channel frames
must take between two end-products in a multiswitch fabric. Only one route can
be shown at a time within the same fabric. If you intend to show a different route
within the same fabric, the previous route is automatically hidden.
Requirements
To view the route between two products, the following conditions must be met:
HA-Fabric Manager User Guide
Icon
Status
Operational
Degraded
Failed
Unknown/Offline
This feature is only available for fabrics consisting solely of HP M-series
All switches or directors in the route must be managed by the application and
attached to the same appliance.
All switches or directors in the route must be Director 2/64, Director 2/140,
Edge Switch 2/32, Edge Switch 2/16, or Edge Switch 2/24 models and must
be running firmware version 1.3 or higher.
All attached products in the route must be in the same zone.
Configuring SAN Products and Fabrics
99
Table of Contents
