Summary of Contents for HP 316095-B21 - StorageWorks Edge Switch 2/24
Page 1
hp StorageWorks edge switch release notes Part Number: AA-RTDZA-TE/958-000284-001 First Edition (January 2003) These release notes contain late-breaking and supplemental information for the HP StorageWorks Edge Switch 2/24 and Edge Switch 2/32. For the latest version of these Release Notes and other Edge Switch documentation, visit the HP storage website at: http://www.hp.com/country/us/eng/prodserv/storage.html.
edge switch release notes These Release Notes contain late breaking and supplemental information for the HP StorageWorks Edge Switch 2/24 and Edge Switch 2/32. Be sure to read these Release Notes before installing an edge switch. This information is periodically updated and available on the World Wide Web at: http://www.hp.com/country/us/eng/prodserv/storage.html.
edge switch release notes CD-ROM Directory Structure The hp StorageWorks edge switch documentation and firmware CD contains the following items: CD-ROM Directory Structure for Edge Switch 2/24 and Edge Switch 2/32 Documentation • Manuals.pdf – (HP StorageWorks Edge Switch and Edge Switch 2/32 Documentation;...
edge switch release notes — firmwareupdate.txt – (Instructions for updating Firmware) • Acrobat — RP505ENU.EXE – (Windows installation file for Acrobat Reader 5.0 with Search) Supported Configurations Operation of multiple switches in a fabric topology is subject to the following topology limits.
edge switch release notes Cable Requirements IMPORTANT: Please note that optical cables for the edge switch must be ordered separately. For cables measuring up to 500 meters (1 Gbps) or 300 meters (2 Gbps), use multi-mode Fibre Channel cables. For longer cables, use single-mode Fibre Channel cables.
edge switch release notes HSG80 Transparent Mode Not Recommended with Controller in SCSI-3 Mode with HP-UX Operating Systems Due to an issue with non-existent duplicate LUNs being displayed with the HP-UX operating systems, the HSG80 controller is restricted to SCSI-2 mode of operation when set to Transparent failover mode.
edge switch release notes Updating an Earlier Version of Firmware FW that predates the 1.3/1.4 FW release must first be updated to a 1.3 FW version or higher before the final update to 2.00.00_33 or 2.00.02_1 can be completed. Using the Same Firmware All switches and directors managed by HAFM should have the same FW level installed—whether 1 Gbps or 2 Gbps capable.
edge switch release notes Ports May Accumulate Spurious Events A port may accumulate “Invalid transmission word” and “Bit-Error Threshold Link Incident” events when a transceiver is poorly seated resulting in a poor ground connection. Workaround Reseating the optical transceiver will correct the problem. edge switch release notes...