Dell PowerVault NX3500 Hardware Owner's Manual page 33
Powervault nx3500 systems
Hide thumbs
Also See for PowerVault NX3500:
- Administrator's manual (218 pages) ,
- Getting started with (209 pages) ,
- Getting started (87 pages)
Table of Contents
Table 1-3. LCD Status Messages
Code
Text
E2021
Incorrect
memory
configuration.
E2022
General
failure
during POST.
Check screen
message.
E2110
Multibit Error
on DIMM ##.
Reseat DIMM.
E2111
SBE log
disabled on
DIMM ##.
Reseat DIMM.
I1910
Intrusion
detected.
Check chassis
cover.
I1911
LCD Log Full.
Check SEL to
review all
Errors.
I1912
SEL full.
Review & clear
log.
(continued)
Causes
Incorrect memory
configuration.
General failure after video. Check screen for specific
The memory module in
slot "##" has had a
multi-bit error (MBE).
The system BIOS has
disabled memory
single-bit error (SBE)
logging and will not log
anymore SBEs until the
system is rebooted. "##"
represents the memory
module implicated by
the BIOS.
System cover has been
removed.
LCD overflow message.
A maximum of ten error
messages can display
sequentially on the LCD.
The eleventh message
instructs the user to check
the SEL for details on the
events.
The SEL is full of events
and is unable to log any
more.
Corrective Actions
Check screen for specific
error messages. See
"Troubleshooting System
Memory" on page 97.
error messages.
See "Troubleshooting
System Memory" on
page 97.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Troubleshooting
System Memory" on
page 97.
Information only.
Check the SEL for details
on the events.
Remove AC power to the
system for 10 seconds or
clear the SEL.
Check the SEL for details
on the events, then clear
the SEL.
About Your Solution
33
Table of Contents
Troubleshooting
