HP 1800 24G - ProCurve Switch Installation And Getting Started Manual page 19

Installation guide

Hide thumbs Also See for 1800 24G - ProCurve Switch:

Table of Contents

Wall Mounting

You can mount the switch on a wall with either the front or rear panel facing

up.

W A R N I N G

For safe operation, please read the "Installation Precautions" on

page 2-2

It is recommended the switch be mounted with the ports facing up or

downward.

C a u t i o n

The switch should be mounted only to a wall or wood surface that is at least

1/2-inch (12.7 mm) plywood or its equivalent.

and

page

2-3, before mounting the switch.

Use a #1 Phillips (cross-head) screwdriver and attach the mounting

brackets to the switch with the included 8-mm M4 screws.

Attach the switch to the wall or wood surface with two 5/8-inch

(15.875 mm) number 12 wood screws (not included).

Installing the Switch

Installation Procedure

2-9

Table of Contents