Configuration Tasks For Template Acls - Cisco 10000-2P2-2DC Software Configuration Manual

10000 series
Table of Contents

Configuration Tasks for Template ACLs

Table 25-1
Element
dstip
srcp
dstport
srcportcmp
Cisco 10000 Series Router Software Configuration Guide
25-4
IP Data Filter Syntax Elements (continued)
Description
Enables destination-IP-address filtering. Applies to packets
whose destination address matches the value of .
If a subnet mask portion of the address is present, the router
compares only the masked bits. If you set to
0.0.0.0, or if this keyword is not present, the filter matches all IP
packets.
Enables source-IP-address filtering. Applies to packets whose
source address matches the value of . If a subnet
mask portion of the address is present, the router compares only
the masked bits. If you set to 0.0.0.0, or if this
keyword is not present, the filter matches all IP packets.
Specifies a protocol specified as a name or a number. Applies to
packets whose protocol field matches this value. Possible names
and numbers are icmp (1), tcp (6), udp (17), and ospf (89). If you
set this value to zero (0), the filter matches any protocol.
Enables destination-port filtering. This keyword is valid only
when is set to tcp (6) or udp (17). If you do not specify
a destination port, the filter matches any port.
defines how to compare the specified to the
actual destination port. This value can be <, =, >, or !.
can be a name or a number. Possible names and numbers
are ftp-data (20), ftp (21), telnet (23), nameserver (42), domain
(53), tftp (69), gopher (70), finger (79), www (80), kerberos
(88), hostname (101), nntp (119), ntp (123), exec (512), login
(513), cmd (514), and talk (517).
Enables source-port filtering. This keyword is valid only when
is set to tcp (6) or udp (17). If you do not specify a
source port, the filter matches any port.
defines how to compare the specified to the
actual destination port. This value can be <, =, >, or !.
can be a name or a number. Possible names and numbers
are ftp-data (20), ftp (21), telnet (23), nameserver (42), domain
(53), tftp (69), gopher (70), finger (79), www (80), kerberos
(88), hostname (101), nntp (119), ntp (123), exec (512), login
(513), cmd (514), and talk (517).
When set to 1, specifies that the filter matches a packet only if a
TCP session is already established. This argument is valid only
when is set to tcp (6).
Chapter 25
Configuring Template ACLs
OL-2226-23
Table of Contents
loading

This manual is also suitable for:

1000510008

Table of Contents