1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. C111 8P Series
  6. Hardware installation manual

Cisco C111 8P Series Hardware Installation Manual

Integrated services router
Hide thumbs
Table of Contents

Quick Links

Hardware Installation Guide for the Cisco 1000 Series Integrated
Services Router
Last Modified: 2019-06-07
Last Modified: 2020-07-23
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Table of Contents
loading

Related Manuals for Cisco C111 8P Series

Summary of Contents for Cisco C111 8P Series

  • Page 1 Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router Last Modified: 2019-06-07 Last Modified: 2020-07-23 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883...
  • Page 2 Cisco has more than 200 offices worldwide. Addresses and phone numbers are listed on the Cisco website at www.cisco.com/go/offices. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/c/en/us/about/legal/trademarks.html.

  • Page 3: Table Of Contents

    General Site Requirements Site Selection Guidelines Rack Requirements Safety Recommendations Power Guidelines and Requirements Network Cabling Specifications Console Port Considerations EIA/TIA-232 USB Serial Console Console Port Considerations Prepare for Router Installation Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 4 Install and Upgrade Internal Modules and Field Replaceable Units Replace the Chassis Covers for C111X and C1111x Remove the Cover Replace the Cover External Modules Locate External Slots for Modules Install and Remove Small Form Pluggable Modules Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 5 Ceiling Mount of the Antenna C H A P T E R 5 ROM Monitor Overview ROM Monitor Overview C H A P T E R 6 Supplier Declaration of Conformity Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 6 Contents Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 7: Overview Of Cisco 1000 Series Integrated Services Routers

    The Cisco 1000 series Integrated Services Routers are the next generation, IOS XE based, multi core, branch routers. They are available in both fixed and modular form factors. The Cisco 1000 series is best suited for small and midsize businesses, enterprise branches and as customer premises equipment in managed services environments.
  • Page 8 4) and pluggable Advanced (CAT 6) with carrier aggregation P-LTE-JN None None None None None WP7605-G None LTE CAT4: B1, B3, B8, B11, B18, B19, B21 3G UMTS HSPA+ Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 9 None RJ45/SFP+1 POE+ Pluggable RJ45 LTE (CAT 4) and pluggable Advanced (CAT 6) with carrier aggregation C11x1(X)-8P 2(1 Combo Micro USB 4 POE/2 None None None RJ45/SFP+1 POE+ RJ45 Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 10: Chassis Views

    Base Models without an 'X' have 4GB of DRAM and Flash Memory. Example: C1111-8P For base model-C11x1X-8PLTEP, 'x' represents the CPU performance level. For more information on the features and specifications of Cisco 1100 Series Integrated Services Routers (ISRs), refer to the...
  • Page 11 4-pin Power Connector GE 0/0/1 GE 0/0/0 - RJ45 GE 0/0/0 - SFP USB3.0 Lower slot0 Upper slot1 LTE Provisioning Port RJ45 / Micro USB Console Kensington Lock Slot Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 12 Non-illuminated Cisco Logo Figure 4: C1101-4P ISR - I/O View Kensington Lock Slot Grounding Power Switch 4-pin Power Connector Reset Button LAN: 0-4 GE WAN Micro USB Console USB3.0 Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 13 4-pin Power Connector Reset Button LAN:0-4 GE WAN Micro-USB console Port Pluggable Grounding Kensington Lock Slot Figure 7: C1109-2PLTE - Bezel View Non-illuminated Cisco logo Main and Diversity Antenna Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 14 Figure 9: C1109-4PLTE2PWX - I/O View Grounding Power Switch Reset Button 4-pin Power Connector LAN:0-4 GE WAN USB 3.0 Micro-USB console Port LTE Antenna Kensington Lock Slot Figure 10: C1121-4Px - Bezel View Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 15 Figure 12: C1121-4PLTEP I/O View Reset Button Power Switch 4-pin Power Connector Ethernet Switch GE 0/0/1 GE WAN 0/0/0 -RJ45 GE WAN 0/0/0 -SFP Micro-USB console USB 3.0 Pluggable Kensington Lock Slot Grounding Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 16 Figure 15: C1121-8PLTEP I/O View Reset Button Power Switch 4-pin Power Connector Ethernet Switch GE 0/0/1 GE WAN 0/0/0 -RJ45 GE WAN 0/0/0 -SFP Micro-USB console USB 3.0 Pluggable Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 17 Wi-Fi Status GE 0/0/1 GE WAN 0/0/0 -RJ45 GE WAN 0/0/0 -SFP Micro-USB console USB 3.0 Pluggable Kensington Lock Slot Grounding Figure 18: C1127X-8PLTEP Bezel View Non-illuminated Cisco logo Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 18 Figure 21: C1128-8PLTEP I/O Panel View Reset Button Power Switch 4-pin Power Connector Ethernet Switch USB 3.0 GE WAN 0/0/0 -RJ45 GE WAN 0/0/0 -SFP Micro-USB console Pluggable SHDSL Kensington Lock Slot Grounding Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 19: Led Indicators

    GE WAN Ports: 0-7 (0,2,4,6 at the top and PoE LED 1,3,5,7 at the bottom) GE1 LED GE0 LED USB LED RJ-45 Console LED USB Console Micro USB Console LED CD LED DATA LED Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 20 Figure 25: Cisco 1121-4PLTEP LED Indicators PoE LED Status Ethernet Switch Ports 0-3 GE 0/0/0 RJ45 LED GE 0/0/1 LED GE 0/0/0 RJ45 LED Micro USB Console LED USB LED Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 21 Ethernet Switch Ports 0-7 (0,2,4,6 at the top and 1,3,5,7 at the bottom) Wi-Fi GE 0/0/0 RJ45 LED GE 0/0/1 LED GE 0/0/0 SFP LED USB LED Micro USB Console LED Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 22 BIOS image is not loadable. Blinking Amber — BIOS/Rommon is booting. Steady Amber — BIOS/Rommon has completed booting, and the system is at the Rommon prompt or booting the platform software. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 23 Red—Ethernet link is not operational or Ethernet failure. Amber—Software upgrade is in progress. Green Off— No link I/O side Ethernet Switch GE LAN Ports, Non-PoE Steady On— link Blink— TXD/RXD data Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 24 I/O Side DSL Data Green Blink— TX/RX Data Console Green Green On— Console I/O side enabled. USB Console Green Off— No USB device I/O side discovered. On— USB device discovered. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 25 Ethernet Switch GE LAN Green Link Activity Ports Off: No link Steady on: Link Blink: TXD/RXD Data GE WAN Ports Green Link Activity Off: No link Steady on: Link Blink: TXD/RXD Data Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 26: Reset Button

    • AC input voltage: Universal 100 to 240 VAC • Frequency: 50 to 60 Hz • Maximum output power: Up to 66W for non-PoE supply and upto 150W for PoE supply Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 27: Slots And Interfaces

    About Slots, Subslots, and Port Numbering The Cisco 1100 series designates its interfaces using a 3-tuple notation that lists the slot, sub slot and port in the format slot/sub-slot/port. The slot number is reserved for the mother board, which is "0". Each interface type is allocated a sub slot and the port number is a unique port on the interface.
  • Page 28 Overview of Cisco 1000 Series Integrated Services Routers Periodic Inspection and Cleaning Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 29: Prepare For Router Installation

    C H A P T E R Prepare for Router Installation Before you install the Cisco 1100 Series Integrated Services Routers, you must prepare your site for the installation. This chapter provides pre-installation information, such as recommendations and requirements that should be considered before installing your router.

  • Page 30: Safety With Electricity

    Connect the Chassis to Earth Ground—To reduce the risk of electric shock, the chassis of this equipment needs to be connected to permanent earth ground during normal use. Statement 445 Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 31: Site Selection Guidelines

    The Cisco 1100 Series ISRs are designed to meet the industry EMC, safety, and environmental standards described in the Regulatory Compliance and Safety Information for the Cisco 1100 Series ISR document.

  • Page 32: Safety Recommendations

    • Allow at least one rack unit of vertical space between routers; more clearance is required when stacking multiple Cisco . Provide adequate heat removal mechanism to keep the surrounding air temperature well within the specified operating temperature condition.

  • Page 33: Network Cabling Specifications

    (PWR-66W-I-DC) Network Cabling Specifications The following sections describe the cables and thee specifications required to install Cisco 1100 Series ISRs: Console Port Considerations The router includes an asynchronous serial console port. The console ports provide access to the router using a console terminal connected to the console port.

  • Page 34: Console Port Considerations

    3-19. For operation with a Microsoft Windows OS version older than Windows 7, the Cisco Windows USB Console Driver must be installed on any PC connected to the console port. If the driver is not installed, prompts guide you through a simple installation process.

  • Page 35: Prepare For Router Installation

    Prepare for Router Installation Prepare for Router Installation Before you install the Cisco 1100 Series Integrated Services Routers, you must prepare your site for the installation. This chapter provides pre-installation information, such as recommendations and requirements that should be considered before installing your router.
  • Page 36 Prepare for Router Installation Required Tools and Equipment for Installation and Maintenance Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 37: Install And Connect The Router

    C H A P T E R Install and Connect the Router This chapter describes how to install and connect Cisco 1000 Series Integrated Services Router (ISR) to LAN and WAN networks. Warning Read the installation instructions before using, installing or connecting the system to the power source.

  • Page 38: Rack Mount

    Do not stack multiple Cisco 1000 ISRs when mounting the routers on a table top. Note When mounting Cisco 1000 ISRs on a rack, ensure that there is ample surrounding space. This ensures more heat removal, which in turn will enable the surrounding air temperature to stay within the specified operating conditions.

  • Page 39: Attach The Rack Mounting Brackets For C112X

    Remove the 6 screws from the bottom of the chassis. Step 2 Place the platform into the bottom tray. Step 3 Secure the original screws from the bottom side of the tray. Example: Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 40: Mount The Router

    • If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack. Statement 1006. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 41: Mount The Router Under A Desk Or A Shelf

    You can order these kits from your Cisco representative. This procedure describes how to mount router under a desk or a shelf .

  • Page 42: Mount Router Using Din Rail Brackets

    The router is shipped with DIN Rail brackets that are to be secured on the bottom side of the chassis. Your chassis installation must allow unrestricted airflow for chassis cooling. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 43: Attach Din-Rail Brackets On C112X

    Step 4 Take the other two screws to secure the din-rail trail assy Example: Figure 36: Attaching Din Rail Brackets for C1121-4Px, C1126-8PLTEP and C1128-8PLTEP Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 44: Wall Mount The Router

    There are two ways to mount a router on the wall, using Key-hole Slots and DIN Rail Brackets. Wall Mount Using Key-hole Slots The Cisco 1100 Series Integrated Services Routers (ISRs) have key-hole slots at the bottom of the chassis for mounting on a wall or any vertical surface.
  • Page 45 Install and Connect the Router Wall Mount Using Key-hole Slots Figure 37: Wall Mount Using Key-hole Slots - C111x Key-hole slots Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 46 Install and Connect the Router Wall Mount Using Key-hole Slots Figure 38: Wall Mount Orientation-C111x Key-hole slots Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 47 Install and Connect the Router Wall Mount Using Key-hole Slots Figure 39: Wall mount using key-hole slots - C1101-4P Key-hole slots Key-hole slots-spacing: 3.024in (76.81mm) Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 48 Install and Connect the Router Wall Mount Using Key-hole Slots Figure 40: Wall mount using key-hole slots - C1101-4PLTEP Key-hole slots Horizontal spacing: 3.100in (78.74mm) Vertical spacing: 5.758inin (146.25mm) Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 49 Wall Mount Using Key-hole Slots Figure 41: Wall mount using key-hole slots - C1109-2P Horizontal spacing: 7.302in (185.47mm) Key-hole slots Vertical spacing: 7.430in (188.72mm) Figure 42: Wall mount using key-hole slots - C1109-4PLTEP Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 50 Install and Connect the Router Wall Mount Using Key-hole Slots Key-hole slots Horizontal spacing: 3.100in (78.74mm) Vertical spacing: 5.758inin (146.25mm) Figure 43: Wall mount using key-hole slots - C1126-8PLTEP Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 51: Wall Mount Using Din Rail Brackets

    Wall mount using DIN Rail brackets is applicable only for C111x. To attach the DIN Rail brackets to the router chassis, use the PHMS screws and the plastic spacers provided for each bracket. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 52 Install and Connect the Router Wall Mount using DIN Rail Brackets Figure 44: DIN Rail Bracket Installation - C111x and C111X Screws DIN Rail Brackets Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 53 Install and Connect the Router Wall Mount using DIN Rail Brackets Figure 45: Orientation of DIN Rail Brackets Figure 46: DIN Rail Brackets and Mount Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 54: Chassis Grounding

    3. Attach the ground lug or ring terminal to the chassis as shown in the below figures. The screw for the ground lug is provided. Tighten the screw; the recommended torque is 8 to 10 inch-lbf (0.9 to 1.1 N-m). Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 55 Install and Connect the Router Chassis Grounding Figure 47: Chassis Ground Connection-Cisco 111x Screw (UNC 6-32) Ground Lug Figure 48: Chassis Ground Connection-Cisco 1101-4PLTEP Screw (UNC 6-32) Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 56: Connect Power Cable

    Ground Lug Connect Power Cable Power supply of the Cisco 1000 Series ISRs is an external AC to DC power adapter. The external DC power connector plugs into the router's 4 points power connector. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 57 Install and Connect the Router Connect Power Cable Figure 50: Power Cable for C111x Power Cable Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 58: Connect The Router To A Console

    Connect the Router to a Console The C111x Series ISR has an asynchronous serial port. This port provides administrative access to the router through a console terminal or a PC. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 59 Connect the Router to a Console Figure 52: Console Adapter for C1101-4PLTEP Micro USB to RJ45 console adapter Figure 53: Console Adapter for C1127X-8PLTEP Micro USB to RJ45 console adapter Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 60: Connect To The Serial Port With Microsoft Windows

    Connect to the Serial Port with Microsoft Windows Use the USB or RJ-45 console port on the router to access the Cisco Internet Operating System (IOS-XE) command line interface (CLI) on the router and perform configuration tasks. A terminal emulation program is required to establish communication between the router and a PC.

  • Page 61: Connect To The Console Port With Mac Os X

    Connect to the USB port with the following command followed by the router USB port speed Example: root@usb-suse /dev# screen /dev/ttyACM0 9600 To disconnect the Linux USB console from the Terminal window Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 62: Connect Wan And Lan Interfaces

    Statement 1088. Ports and Cabling This section summarizes typical WAN and LAN connections for Cisco 1100 Series ISRs. The connections summarized here are described in detail in the Cisco Modular Access Router Cable Specifications document on cisco.com.

  • Page 63: Connection Procedures And Precautions

    After installing the router and connecting the cables, you can configure the router with basic configurations. For more information on how to configure the router, see the Cisco 1100 Series Software Configuration Guide. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 64 Install and Connect the Router Configure the Router at Startup Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 65: Install And Upgrade Internal Modules And Field Replaceable Units

    Only trained and qualified personnel should be allowed to install, replace or service this equipment. Statement 1030 Cisco 1100 Series ISRs have removable covers. Do not run the routers with the cover off. Doing so can cause the router to overheat very quickly.

  • Page 66: Remove The Cover

    Read the Safety Warnings and disconnect the power supply before you perform any module replacement. Step 2 Confirm the router is turned off and disconnected from the power supply. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 67: Replace The Cover

    The covers are an integral part of the safety design of the product. Do not operate the unit without the covers installed. Statement 1077. 1 and 2 Replace the 14 screws on either side of the cover. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 68: External Modules

    This section describes how to install external modules and FRUs in the Cisco 1100 Series ISRs. The information is contained in the following sections: Warning Only trained and qualified personnel should be allowed to install, replace or service this equipment.

  • Page 69: Install And Remove Small Form Pluggable Modules

    Install and Remove Small Form Pluggable Modules Install and Remove Small Form Pluggable Modules This section describes how to install and remove Small Form Pluggable (SFP) modules in the Cisco 1100 Series ISRs. The information is contained in the following sections: Warning Pluggable optical modules comply with IEC 60825-1 Ed.

  • Page 70: Install An Lte Pluggable Module

    System and spare CAT4 LTE Pluggable P-LTE-US System and spare CAT4 LTE Pluggable P-LTE-GB System and spare CAT4 LTE Pluggable P-LTE-JN WP7605-G LTE CAT4 P-LTE-IN WP7608-G LTE CAT4 P-LTE-MNA WP7610-G Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 71: Install An Lte Pluggable Module On A C1101-4P

    Insert and then gently push the LTE pluggable into the pluggable slot of C1101-4P until firmly fixed. Step 2 Tighten the screw, the recommended torque is 10-12 in-lb. Figure 54: LTE Pluggable - C1101-4P Item Description GPS Antenna LTE Antenna Ground Lug Kensingston Lock Slot Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 72 Install and Upgrade Internal Modules and Field Replaceable Units Install an LTE Pluggable Module on a C1101-4P Figure 55: LTE Pluggable - C1127X-8PLTEP Item Description GPS Antenna LTE Antenna Ground Lug Kensingston Lock Slot Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 73 Common heat spreader + thermal interface Enclosure base to support 4-antenna 4-1 SMA-MHF4 cable assembly SMA Diversity Antenna for usability and Micro-USB port access Figure 57: LTE Pluggable - C1118-8PLTEAP Back Panel Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 74 4. You have now successfully inserted the Micro-SIM cards into the LTE pluggable module. The marking on the Mirco-SIM door should align with Micro-SIM0 on the pluggable module with the arrow pointing upward. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 75: Install A Micro-Sim Card Into A Usb Lte Dongle

    Figure 59: Insert the Micro-SIM cards Install a Micro-SIM Card into a USB LTE Dongle This section describes how to insert a micro-SIM card into a USB LTE dongle in a C1101-4P router. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 76 1. Ensure the micro-SIM is installed in the LTE USB dongle. 2. Plug the LTE USB dongle into the magnet holder. 3. Attach the magnet holder into the USB port on the metal front panel of C1101-4P. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 77 Install a Micro-SIM Card into a USB LTE Dongle Figure 61: LTE USB 2.0 Dongle for C1101-4P Number Description Supporting ring Magnet Extend outward 30mm Plug-in direction Number Description Supporting ring Dongle holder with magnet Router-C1101-4PLTEPW Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 78: Antenna Mounting Instructions

    Follow the same procedure to install the USB LTE dongle onto routers with a vertical USB slot. Antenna Mounting Instructions This section describes how to mount the antenna on Cisco 1000 Series ISRs. The information is contained in the following sections:...
  • Page 79 2. Pick up the wall-mounting bracket (700-121609-01) and 2 SCREWS (48-0580-01). 3. Align and fasten the screws. 4. Plug the USB cable to the USB port on the chassis to complete the mounting procedure. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 80: Wall Mount Of The Antenna

    Assemble the USB cable (74-122795-01), dongle and antenna (07-100470-01) together. Pick up the wall-mount bracket (700-121609-01), two SCREWS (48-0580-01). Align and fasten the screws (recommended torque is 10-12 in-lb), the wall-mount is complete. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 81 Ensure the use the cable clip within USB cable kit (74-122795-01) to manage cable routing and to hold the cable weight. Step 3 Ensure there are no sharp radius within the USB cable routing. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 82: Ceiling Mount Of The Antenna

    Pick up the R-Brackets (700-121611-01) Step 2 Place and fix the bracket at an appropriate location on the rack using two screws. Step 3 Tighten the screw, the recommended torque is 10-12 in-lb. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 83 2. Pick up the wall-mounting bracket (700-121609-01) and 2 SCREWS (48-0580-01). 3. Align and fasten the screws. 4. Plug the USB cable to the USB port on the chassis to complete the mounting procedure. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 84 Install and Upgrade Internal Modules and Field Replaceable Units Option A - Rack Mount at the Same Height with the Platform Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

  • Page 85: Rom Monitor Overview

    The ROMMON is the bootloader that initializes the hardware when the platform is powered on or reset. From the ROMMON prompt, a Cisco IOS XE image can be manually booted. There is also an autoboot option to boot a specified IOS XE image for every power-on or reset. When new features or significant defects are resolved, a newer ROMMON release is available on CCO.
  • Page 86 ROMMON mode is a router mode, not a mode within the Cisco IOS XE software. The ROMMON software and the Cisco IOS XE software are two separate programs that run on the same router. At any given time, the router is running one of these programs, but it never runs both at the same time.

  • Page 87: Supplier Declaration Of Conformity

    Licensed Service Provider or Wireless Carrier. Modifications by User or Installer Modifying the equipment without Cisco's authorization may result in the equipment being no longer compliant with FCC requirements for Class A digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
  • Page 88 Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm (7.87 in.) de distance entre la source de rayonnement et votre corps. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 89 This telecommunication equipment conforms to NTC/NBTC technical requirement (optional) Radiocommunication equipment has electromagnetic field strength in compliance with the Safety Standard for the Use of Radiocommunication Equipment on Human Health announced by the National Telecommunication Commission. Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...
  • Page 90 Supplier Declaration of Conformity Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router...

This manual is also suitable for:

1000 seriesC1111 8p seriesC111 4p seriesC1109-4plte2pw seriesC11 1 8pltep seriesC1121 8pltepw seriesc1101-4p ... Show all

Table of Contents