Dell DX6004S Hardware Owner's Manual page 123
Hardware owner's manual
Hide thumbs
Also See for DX6004S:
- Getting started manual (49 pages) ,
- Manual (84 pages) ,
- Application manual (81 pages)
Table of Contents
4 To remove the battery, push the metal tab away from the battery until the
battery pops out. See Figure 3-20.
5 To install the new system battery, hold the battery with the "+" facing up,
and aligned to the metal tab on the socket.
Figure 3-20. Replacing the System Battery
1
1
positive side of battery connector
3
system battery
6 Press the battery straight down into the socket until it snaps into place.
7 Close the system. See "Closing the System" on page 77.
8 Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
9 Enter the System Setup program to confirm that the battery is operating
properly. See "Entering the System Setup Program" on page 52.
10 Enter the correct time and date in the System Setup program's Time and
Date fields.
11 Exit the System Setup program.
2
2
Installing System Components
negative side of battery connector
3
123
Table of Contents
Troubleshooting
