Table of Contents
Chapter 2
Installing and Starting Up the Switch
Attaching the Brackets to the Switch
78-6456-04
Figure 2-2
Removing Screws from the Catalyst 3548 XL Switch
46
47 48
47X
48X
The bracket orientation and the screws you use depend on whether you are
attaching the brackets for a 19-inch or a 24-inch rack. Use two of the supplied
screws to attach each bracket, according to the following guidelines:
For a 19-inch rack, use the supplied number-8 Phillips flat-head screws to
•
attach the long side of the bracket to the switch.
For a 24-inch rack, use the supplied number-8 Phillips truss-head screws to
•
attach the short side of the bracket to the switch.
Figure 2-3 and Figure 2-4 show how to attach a bracket to one side of the switch.
Follow the same steps to attach the second bracket to the opposite side.
Figure 2-3
Attaching Brackets for 19- and 24-Inch Racks (Front Panel Forward)
Phillips
flat-head
screws
Catalyst 3548 XL switch
19" Configuration
Catalyst 3500 Series XL Hardware Installation Guide
Installing the Switch in a Rack
2-11
Hide quick links:
Table of Contents
Troubleshooting
