Cisco WS-C3524-PWR-XL-EN Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Switch
  5. WS-C3524-PWR-XL-EN
  6. Installation manual

Cisco WS-C3524-PWR-XL-EN Installation Manual

Installation guide
Hide thumbs Also See for WS-C3524-PWR-XL-EN:
Table of Contents

Quick Links

Catalyst 3500 Series XL Hardware
Installation Guide
August 2003
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel:
408 526-4000
800 553-NETS (6387)
Fax:
408 526-4100
Customer Order Number: DOC-786456=
Text Part Number: 78-6456-04
Table of Contents
loading

Related Manuals for Cisco WS-C3524-PWR-XL-EN

Summary of Contents for Cisco WS-C3524-PWR-XL-EN

  • Page 1 Catalyst 3500 Series XL Hardware Installation Guide August 2003 Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Customer Order Number: DOC-786456= Text Part Number: 78-6456-04...
  • Page 2 You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures: •...
  • Page 3 CCIP, CCSP, the Cisco Arrow logo, the Cisco Powered Network mark, Cisco Unity, Follow Me Browsing, FormShare, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Aironet, ASIST,...
  • Page 5 Obtaining Documentation xviii Cisco.com xviii Documentation CD-ROM Ordering Documentation Documentation Feedback Obtaining Technical Assistance Cisco TAC Website Opening a TAC Case TAC Case Priority Definitions Obtaining Additional Publications and Information xxii Product Overview C H A P T E R Features...

  • Page 6: Table Of Contents

    RPS LED 1-15 Port LEDs and Modes 1-16 Rear-Panel Description 1-21 Power Connectors 1-22 Internal Power Supply Connector 1-23 Cisco RPS Connector 1-23 Console Port 1-24 Management Options 1-24 Network Configuration Examples 1-25 Design Concepts for Using the Switch 1-25...
  • Page 7 Contents Installing the Switch in a Rack Removing Screws from the Switch 2-10 Attaching the Brackets to the Switch 2-11 Mounting the Switch in a Rack 2-13 Attaching the Optional Cable Guide 2-13 Installing the Switch on a Wall 2-15 Attaching the Brackets to the Switch 2-15 Attaching the Switch to a Wall...
  • Page 8 Connecting to a PC Connecting to a Terminal Translated Safety Warnings A P P E N D I X Attaching the Cisco RPS (model PWR600-AC-RPS) Attaching the Cisco RPS (model PWR300-AC-RPS-N1) Service Personnel Warning Qualified Personnel Warning Installation Instructions Warning...
  • Page 9 Contents Grounded Equipment Warning C-23 Supply Circuit Warning C-24 No On/Off Switch Warning C-25 Power Supply Warning C-27 Work During Lightning Activity Warning C-30 Product Disposal Warning C-31 Chassis Warning—Rack-Mounting and Servicing C-33 Chassis Power Connection Warning C-38 Shock Hazard from Interconnections Warning C-41 N D E X Catalyst 3500 Series XL Hardware Installation Guide...
  • Page 10 Contents Catalyst 3500 Series XL Hardware Installation Guide 78-6456-03...
  • Page 11 Preface Audience This guide is for the networking or computer technician responsible for installing and configuring a Catalyst 3500 series XL switch. We assume that you are familiar with the concepts and terminology of Ethernet and local area networking. Purpose The Catalyst 3500 Series XL Hardware Installation Guide documents the hardware features of Catalyst 3500 series XL switches.
  • Page 12 Preface Organization Organization This guide is organized into the following chapters: Chapter 1, “Product Overview,” is a physical and functional overview of the switch. It describes the switch ports, the standards they support, and the switch LEDs. Examples of how the switch could be installed suggest possible deployment strategies.
  • Page 13 Preface Conventions Notes, cautions, and warnings use the following conventions and symbols: Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual. Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.
  • Page 14 Preface Conventions Varoitus TÄRKEITÄ TURVALLISUUSOHJEITA Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla. SÄILYTÄ...
  • Page 15 Preface Conventions Avvertenza IMPORTANTI ISTRUZIONI SULLA SICUREZZA Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento.
  • Page 16 Preface Conventions ¡Advertencia! INSTRUCCIONES IMPORTANTES DE SEGURIDAD Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes.
  • Page 17 Preface Conventions Catalyst 3500 Series XL Hardware Installation Guide xvii 78-6456-04...

  • Page 18: Related Publications

    These sections explain how to obtain technical information from Cisco Systems. Cisco.com You can access the most current Cisco documentation on the World Wide Web at this URL: http://www.cisco.com/univercd/home/home.htm You can access the Cisco website at this URL: http://www.cisco.com...

  • Page 19: Ordering Documentation

    Preface Obtaining Documentation Documentation CD-ROM Cisco documentation and additional literature are available in a Cisco Documentation CD-ROM package, which may have shipped with your product. The Documentation CD-ROM is updated regularly and may be more current than printed documentation. The CD-ROM package is available as a single unit or through an annual or quarterly subscription.

  • Page 20: Documentation Feedback

    The Cisco TAC website (http://www.cisco.com/tac) provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The Cisco TAC website is available 24 hours a day, 365 days a year. Accessing all the tools on the Cisco TAC website requires a Cisco.com user ID and password.
  • Page 21 For a complete listing of Cisco TAC contacts, go to this URL: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml TAC Case Priority Definitions To ensure that all cases are reported in a standard format, Cisco has established case priority definitions. Priority 1 (P1)—Your network is “down” or there is a critical impact to your business operations.

  • Page 22: Obtaining Additional Publications And Information

    Internetworking Terms and Acronyms Dictionary, Internetworking Technology Handbook, Internetworking Troubleshooting Guide, and the Internetworking Design Guide. For current Cisco Press titles and other information, go to Cisco Press online at this URL: http://www.ciscopress.com •...
  • Page 23 Preface Obtaining Additional Publications and Information http://www.cisco.com/en/US/about/ac123/ac147/about_cisco_the_internet_ protocol_journal.html Training—Cisco offers world-class networking training. Current offerings in • network training are listed at this URL: http://www.cisco.com/en/US/learning/index.html Catalyst 3500 Series XL Hardware Installation Guide xxiii 78-6456-04...
  • Page 24 Preface Obtaining Additional Publications and Information Catalyst 3500 Series XL Hardware Installation Guide xxiv 78-6456-04...

  • Page 25: Product Overview

    10/100 and Gigabit Ethernet traffic from other network devices. A feature specific to the Catalyst 3524-PWR XL switch is its ability to provide inline power to Cisco IP Phones. (Phone adapters are not required when connecting to the Catalyst 3524-PWR XL 10/100 switch ports.)
  • Page 26 Chapter 1 Product Overview Features Figure 1-1 Catalyst 3500 Series XL Switches Switch Description WS-C3508G-XL 8 GBIC -based gigabit module slots WS-C3512-XL 12 autosensing10/100 Ethernet ports 11 12 2 GBIC-based gigabit module slots WS-C3524-XL 24 autosensing 10/100 Ethernet ports 11 12 13 14 15 16 17 18...
  • Page 27 • • High-speed EtherChannel connections between switches and servers 8192 MAC addresses • • Cisco Group Management Protocol (CGMP) to limit the flooding of IP multicast traffic • Broadcast storm control to prevent performance degradation from broadcast storms • Switch Port Analyzer (SPAN) port monitoring on any port Support for command switch redundancy •...
  • Page 28 Broadcast storm control to prevent performance degradation from • broadcast storms SPAN port monitoring on any port • Support for command switch redundancy • • Support for Cisco GBIC modules GigaStack GBIC – – 1000BaseSX GBIC module 1000BaseLX/LH GBIC module – 1000BaseZX GBIC module –...
  • Page 29 Connection for optional Cisco RPS 300 that operates on AC input and • supplies DC output to the Catalyst 3524-PWR XL switch Inline Power Ability to provide inline power for Cisco IP Phones from all 24 10/100 • (Catalyst 3524-PWR Ethernet ports...
  • Page 30 Chapter 1 Product Overview Front-Panel Description Figure 1-2 Catalyst 3508G XL Switch GBIC module slots Figure 1-3 Catalyst 3512 XL Switch 11 12 10/100 ports GBIC module slots Figure 1-4 Catalyst 3524 XL Switch 11 12 13 14 15 16 17 18 19 20 21 22...
  • Page 31 The 10/100 switch ports can connect, up to a distance of 100 meters, to any compatible network device: 10BaseT-compatible devices such as workstations, Cisco IP Phones, and • hubs through standard RJ-45 connectors and Category 3, 4, or 5 cabling...
  • Page 32 IOS Desktop Switching Software Configuration Guide for more information about these features. Cisco IP Phones—connected to the 10/100 ports on the Catalyst 3512, 3524, and 3548 XL switches—must be connected to an AC power source. However, the Catalyst 3524-PWR XL 10/100 ports can: •...
  • Page 33 Product Overview Front-Panel Description only provides power if a Cisco IP Phone is connected to it. The Auto setting is the default. However, when you select the Never setting for inline power on a port, the port does not provide power even if a Cisco IP Phone is connected to it.
  • Page 34 Chapter 1 Product Overview Front-Panel Description Figure 1-7 Installing a 1000BaseX GBIC Module in the Switch Metal flap door GBIC module slot 1000BaseX GBIC module Figure 1-8 Installing a GigaStack GBIC Module in the Switch Metal flap door GBIC module slot GigaStack GBIC Catalyst 3500 Series XL Hardware Installation Guide 1-10...

  • Page 35: Leds

    All of the LEDs described in this section except the utilization meter (UTL) are visible on the VSM home page and Cluster Manager page. The Cisco IOS Desktop Switching Software Configuration Guide describes how to use the Cluster Management Suite to monitor individual switches and how to use cluster management software to monitor all the switches in a cluster.
  • Page 36 Chapter 1 Product Overview Front-Panel Description Figure 1-10 Catalyst 3512 and 3524 XL LEDs Port LEDs S Y S T E M R P S S T A T U S M O D E 1 1 X U T IL D U P L X S P E E D Mode button...
  • Page 37 Chapter 1 Product Overview Front-Panel Description Figure 1-11 Catalyst 3524-PWR XL LEDs Port LEDs 11 12 SYSTE M MODE STATU S DUPLX SPEED LINE PWR System LED Redundant power system LED Mode button Status LED Duplex LED Speed LED Line power LED Catalyst 3500 Series XL Hardware Installation Guide 1-13 78-6456-04...

  • Page 38: System Led

    Chapter 1 Product Overview Front-Panel Description Figure 1-12 Catalyst 3548 XL LEDs Port LEDs S Y S T E M R P S S T A T U S U T IL D U P L X 1 5 X S P E E D M O D E 1 6 X...

  • Page 39: Rps Led

    The Redundant Power System (RPS) LED shows the RPS status. Table 1-4 Table 1-5 list the LED colors and their meanings. The Cisco RPS 600 (model PWR600-AC-RPS) supports the Note Catalyst 3512, 3524, 3548, and 3508 XL switches. Table 1-4...

  • Page 40: Port Leds And Modes

    Internal power supply of the switch is down, and redundancy is lost. The switch is operating on the RPS. For more information about the failure conditions on the Cisco RPS 300, refer to the Cisco Redundant Power System 300 Hardware Installation Guide.
  • Page 41 Chapter 1 Product Overview Front-Panel Description Table 1-6 Port Mode LEDs (continued) Mode LED Port Mode Description DUPLX Port duplex mode The port duplex mode: full duplex or half duplex. SPEED Port speed The port operating speed: 10, 100, or 1000 Mbps. LINE PWR Port inline power The inline power status: on or off.
  • Page 42 Chapter 1 Product Overview Front-Panel Description Table 1-7 Meaning of LED Colors in Different Modes on the Catalyst 3508, 3512, 3524, and 3548 XL Switches (continued) Port Mode LED Color Meaning 10/100 ports SPEED (speed) Port is operating at 10 Mbps. Green Port is operating at 100 Mbps.
  • Page 43 Green Inline power is on. If the Cisco IP Phone is receiving power from an AC power source, the port LED is off even if the IP phone is connected to the switch port. The LED turns green only when the switch port is providing power.
  • Page 44 Chapter 1 Product Overview Front-Panel Description Figure 1-14 Bandwidth Utilization for the Catalyst 3512 XL Switch Catalyst 3500 11 12 < 25% + 25% – 49% + 50% + Figure 1-15 Bandwidth Utilization for the Catalyst 3524 XL Switch Catalyst 3500 11 12 13 14 15 16...

  • Page 45: Rear-Panel Description

    Chapter 1 Product Overview Rear-Panel Description Rear-Panel Description Switch rear panels have an AC power connector, an RPS connector, and an RJ-45 console port (see Figure 1-17, Figure 1-19, Figure 1-18, and Figure 1-20), which are described in this section. Figure 1-17 Catalyst 3508G XL Rear Panel RATING 100-127/ 200-240V ~...

  • Page 46: Power Connectors

    AC power RJ-45 connector exhaust console port Redundant power system connector Power Connectors You can provide power to the switch either through the internal power supply or through the Cisco RPS. Catalyst 3500 Series XL Hardware Installation Guide 1-22 78-6456-04...

  • Page 47: Internal Power Supply Connector

    DC output power modules. The power source is quasi-redundant because there are two AC input power modules for the Cisco RPS and one DC output power module for each external device. The AC input to the Cisco RPS is fully redundant, but the DC output to the external devices is not.

  • Page 48: Console Port

    Attach only the Cisco RPS (model PWR300-AC-RPS) to the RPS Warning receptacle. For more information on the Cisco RPS 300, refer to the Cisco Redundant Power System 300 Hardware Installation Guide. Console Port You can connect a Catalyst 3500 XL switch to a PC by means of the console port and the supplied rollover cable and DB-9 adapter.

  • Page 49: Network Configuration Examples

    CLI. If the switch is connected to your network, you can use a Telnet connection to manage the switch from a remote location. See the Cisco IOS Desktop Switching Command Reference for more information.
  • Page 50 Chapter 1 Product Overview Network Configuration Examples Table 1-9 Considerations for Increasing Network Performance Network Demands Suggested Design Methods • Too many users on a single • Create smaller network segments so that fewer users share network segment and a growing the bandwidth, and place the network resources in the same number of users accessing the logical network as the users who access those resources...
  • Page 51 Chapter 1 Product Overview Network Configuration Examples Using gigabit GBIC modules on two of the switches, you can have redundant uplink connections to a gigabit backbone switch such as the Catalyst 3508G XL switch. If one of the redundant connections fails, the other can serve as a backup path.
  • Page 52 Chapter 1 Product Overview Network Configuration Examples Figure 1-21 Example Configurations with Catalyst 3500 XL Switches Cost-Effective Wiring Closet Catalyst 3548 XL switch Catalyst 3548 XL GigaStack cluster High-Performance Workgroup Catalyst 3508 XL or 4908G-L3 switch Catalyst 3500 XL cluster Redundant Gigabit Backbone Catalyst 4908G-L3 switch Catalyst 4908G-L3 switch...

  • Page 53: Small- To Medium-Sized Network Configuration

    Chapter 1 Product Overview Network Configuration Examples Small- to Medium-Sized Network Configuration Figure 1-22 illustrates a configuration for a network that has up to 250 users. Users in this network require e-mail, file-sharing, database, and Internet access. You optimize network performance by placing workstations on the same logical segment as the servers they access most often.
  • Page 54 Chapter 1 Product Overview Network Configuration Examples Figure 1-22 Small- to Medium-Sized Network Configuration Cisco 2600 router 100 Mbps (200 Mbps full duplex) Gigabit server 1 Gbps (2 Gbps full duplex) Catalyst 3500 XL Gigabit GigaStack cluster server 10/100 Mbps...

  • Page 55: Collapsed Backbone And Switch Cluster Configuration

    Each 10/100 inline-power port on the Catalyst 3524-PWR XL switches provides –48V DC power to the Cisco IP Phone. The IP phone can receive redundant power when it also is connected to an AC power source. IP phones connected to switches other than the Catalyst 3524-PWR XL switches receive power from an AC power source.
  • Page 56 (400 Mbps in full duplex). Figure 1-23 Collapsed Backbone and Switch Cluster Configuration Gigabit servers Cisco CallManager Catalyst 4908G-L3 switch Cisco 2600 router 200 Mbps 1 Gbps Fast EtherChannel (2 Gbps full duplex) (400 Mbps full duplex Fast EtherChannel) Catalyst...

  • Page 57: Large Campus Configuration

    Catalyst 3500 and 2900 XL switches. The Catalyst 6500 switch provides the workgroups with gigabit access to core resources: Cisco 7000 series router for access to the WAN and the Internet. • • Server farm that includes a call-processing server running Cisco CallManager software.
  • Page 58 1 Gbps (2 Gbps full duplex) Catalyst Catalyst 3500 XL and 2900 XL 3524-PWR XL GigaStack cluster GigaStack cluster Cisco IP Phones Cisco IP Phones Workstations running power Cisco SoftPhone software source Catalyst 3500 Series XL Hardware Installation Guide 1-34 78-6456-04...

  • Page 59: Chapter 2 Installing And Starting Up The Switch

    C H A P T E R Installing and Starting Up the Switch This chapter describes how to install and start up your Catalyst 3500 XL switches and to interpret the power-on self-test (POST) that ensures proper operation. Read the topics, and perform the procedures in the order that they are presented: Pre-installation information and guidelines •...

  • Page 60: Preparing For Installation

    Chapter 2 Installing and Starting Up the Switch Preparing for Installation Preparing for Installation Warnings These warnings are translated into several languages in Appendix C, “Translated Safety Warnings.” This equipment is to be installed and maintained by service personnel only as Warning defined by AS/NZS 3260 Clause 1.2.14.3 Service Personnel.
  • Page 61 Chapter 2 Installing and Starting Up the Switch Preparing for Installation To prevent the switch from overheating, do not operate it in an area that Warning exceeds the maximum recommended ambient temperature of 113°F (45°C). To prevent airflow restriction, allow at least 3 inches (7.6 cm) of clearance around the ventilation openings.
  • Page 62 Statement 1072 The following warning applies to the Catalyst 3508, 3512, 3524, and 3548 XL switches: Warning Attach only the Cisco RPS (model PWR600-AC-RPS) to the RPS receptacle. Statement 100 Catalyst 3500 Series XL Hardware Installation Guide 78-6456-04...

  • Page 63: Emc Regulatory Statements

    Chapter 2 Installing and Starting Up the Switch Preparing for Installation The following warning applies to the Catalyst 3524-PWR XL switch: Attach only the Cisco RPS (model PWR300-AC-RPS-N1) to the RPS receptacle. Warning Statement 100B EMC Regulatory Statements U.S.A. U.S. regulatory information for this product is in the front matter of this manual.

  • Page 64: Japan

    Chapter 2 Installing and Starting Up the Switch Preparing for Installation Japan Warning This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions.

  • Page 65: Hungary

    Chapter 2 Installing and Starting Up the Switch Preparing for Installation Hungary Warning This equipment is a class A product and should be used and installed properly according to the Hungarian EMC Class A requirements (MSZEN55022). Class A equipment is designed for typical commercial establishments for which special conditions of installation and protection distance are used.

  • Page 66: Verifying Package Contents

    Carefully remove the contents from the shipping container, and check each item for damage. If any item is missing or damaged, contact your Cisco representative or reseller for support. Return all packing materials to the shipping container, and save it.

  • Page 67: Installing The Switch In A Rack

    • One RJ-45-to-RJ-45 rollover cable One RJ-45-to-DB-9 female adapter • • Cisco Information Packet, containing warranty, safety, and support information Installing the Switch in a Rack To prevent bodily injury when mounting or servicing this unit in a Warning rack, you must take special precautions to ensure that the system remains stable.

  • Page 68: Removing Screws From The Switch

    Chapter 2 Installing and Starting Up the Switch Installing the Switch in a Rack The illustrations in this section show the Catalyst 3508G XL switch Note as an example. Other switches in the series (Catalyst 3512, 3524, 3524-PWR, and 3548 XL) can also be installed as shown here. Figure 2-1 Bracket Mounting Points 19"...

  • Page 69: Attaching The Brackets To The Switch

    Chapter 2 Installing and Starting Up the Switch Installing the Switch in a Rack Figure 2-2 Removing Screws from the Catalyst 3548 XL Switch Catalyst 3548 XL switch 47 48 Attaching the Brackets to the Switch The bracket orientation and the screws you use depend on whether you are attaching the brackets for a 19-inch or a 24-inch rack.
  • Page 70 Chapter 2 Installing and Starting Up the Switch Installing the Switch in a Rack Phillips truss-head screws 24" Configuration Figure 2-4 Attaching Brackets for 19- and 24-Inch Racks (Rear Panel Forward) Phillips flat-head screws 19" Configuration Phillips truss-head screws 24" Configuration Catalyst 3500 Series XL Hardware Installation Guide 2-12 78-6456-04...

  • Page 71: Mounting The Switch In A Rack

    After the switch is mounted in the rack, attach the power cord to the switch. If you are using the Cisco RPS, see the Cisco RPS documentation for installation instructions. After the power is connected, the System LED turns amber for 2 seconds, and then it flashes green while the switch completes the series of POST tests described in “Powering On the Switch and Running POST”...
  • Page 72 Chapter 2 Installing and Starting Up the Switch Installing the Switch in a Rack The Catalyst 3548 XL switch ships with a special cable guide as Note shown in Figure 2-7. This cable guide secures up to 48 cables. Use the supplied black screw to mount it on the left bracket.

  • Page 73: Installing The Switch On A Wall

    Chapter 2 Installing and Starting Up the Switch Installing the Switch on a Wall Installing the Switch on a Wall This section describes the steps required to attach the switch to a wall: • Attaching the brackets to the switch Attaching the switch to a wall •...

  • Page 74: Attaching The Switch To A Wall

    After the switch is mounted on the wall, attach the power cord to the switch. If you are using the RPS, see the Cisco RPS documentation. After the power is connected, the system LED turns amber for 2 seconds, and then it flashes green while the switch completes a series of self-tests described in the “Powering On the Switch and Running POST”...

  • Page 75: Installing The Switch On A Table Or Shelf

    If your configuration has an RPS, see the “Power Connectors” section on page 1-22 and the Cisco RPS documentation. To power on the switch after you install it, follow these steps: Step 1 Make sure that you have started the emulation software program (such as ProComm, HyperTerminal, tip, or minicom) from your management station.

  • Page 76: Connecting To The 10/100 Ports

    You can configure the 10/100 ports on the Catalyst 3524-PWR XL switch to either automatically provide inline power when a Cisco IP Phone is connected or to never provide inline power even if a Cisco IP Phone is connected. The default setting is Auto.
  • Page 77 DUPLX SPEED Note The Catalyst 3524-PWR XL switch can connect to a Cisco IP Phone through a straight-through, twisted-pair cable. The rear panel of the Cisco IP Phone might have more than one RJ-45 jack. Use the LAN-to-phone jack to connect the phone to the Catalyst 3524-PWR XL switch.

  • Page 78: Connecting To The Gbic Module Ports

    Chapter 2 Installing and Starting Up the Switch Connecting to the GBIC Module Ports Connect the other end of the cable to an RJ-45 connector of the other device. The Step 2 port LED comes on when both the switch and the connected device have established link.

  • Page 79: Connecting To A 1000Basex Gbic Module Port

    Chapter 2 Installing and Starting Up the Switch Connecting to the GBIC Module Ports Connecting to a 1000BaseX GBIC Module Port Caution Do not remove the rubber plugs from the fiber-optic port or the rubber caps from the fiber-optic cable until you are ready to connect the cable.

  • Page 80: Connecting To A Gigastack Gbic Module Port

    Chapter 2 Installing and Starting Up the Switch Connecting to the GBIC Module Ports The port status is amber while Spanning Tree Protocol discovers the Note topology and searches for loops. This takes about 30 seconds. The port LED then turns green. Connecting to a GigaStack GBIC Module Port Connect the GigaStack cable connector to the GigaStack GBIC as shown in Figure...

  • Page 81: Connecting A Pc Or Terminal To The Console Port

    1 stop bit • No parity • After you have gained access to the switch, you can change the port baud rate. See the Cisco IOS Desktop Switching Software Configuration Guide for instructions. Catalyst 3500 Series XL Hardware Installation Guide 2-23 78-6456-04...

  • Page 82: Assigning Switch Information

    Chapter 2 Installing and Starting Up the Switch Assigning Switch Information Using the supplied rollover cable, insert the RJ-45 connector into the console port, Step 3 as shown in Figure 2-13. See the “Identifying a Rollover Cable” section on page B-5 for a description of the pinout.

  • Page 83: Using The Setup Program

    If you are configuring the switch as a standalone switch or as a command switch, you must assign IP information. Refer to the Cisco IOS Desktop Switching Software Configuration Guide for more information. You will need the following information from your system administrator: Switch IP address ___________.___________.___________._________...
  • Page 84 RJ-45-to-DB-25 female DTE adapter if you want to connect the switch console port to a terminal. You can order a kit (part number ACS-DSBUASYN=) containing that adapter from Cisco. For console port and adapter pinout information, see the “Cable and Adapter Specifications” section on page B-4.
  • Page 85 Chapter 2 Installing and Starting Up the Switch Assigning Switch Information On a command switch, the host name is limited to Note 28 characters; on a member switch to 31 characters. Do not use -n, where n is a number, as the last characters in a host name for any switch.
  • Page 86 If the information is not correct, enter N at the prompt, press Return, and begin again at Step 1. The Cisco IOS Desktop Switching Software Configuration Guide describes how to set a password to protect the switch against unauthorized Telnet access and how to access the switch if you forget the password.

  • Page 87: Using Bootp

    Chapter 2 Installing and Starting Up the Switch Default Configuration Settings Using BOOTP You can use BOOTP to assign IP information to a Catalyst 3500 XL switch. A database with a list of physical MAC addresses and corresponding IP addresses must be set up on the BOOTP server.
  • Page 88 Chapter 2 Installing and Starting Up the Switch Default Configuration Settings Table 2-1 Default Configuration Settings Feature Default Setting Management Switch IP address, subnet mask, and User-assigned values entered in the setup default gateway program. Cluster command status Enabled. Cluster name User-assigned value entered in the setup program.

  • Page 89: Where To Go Next

    Refer to the release notes on CCO for the most current browser requirements. Use the CLI to configure the switch from the console. See Cisco IOS Desktop • Switching Command Reference for information on using the CLI with Catalyst 3500 XL switches.
  • Page 90 Chapter 2 Installing and Starting Up the Switch Where to Go Next Catalyst 3500 Series XL Hardware Installation Guide 2-32 78-6456-04...

  • Page 91: Troubleshooting

    (CLI), or from an Simple Network Management Protocol (SNMP) workstation. See the Cisco IOS Desktop Switching Software Configuration Guide, the Cisco IOS Desktop Switching Command Reference (online only), or the documentation that came with your SNMP application for details.

  • Page 92: Chapter 3 Troubleshooting

    If a test fails, the port LED associated with the test turns amber, and the system LED turns amber. Note POST failures are usually fatal. Call Cisco Systems if your switch does not pass POST. Table 3-1...

  • Page 93: Diagnosing Problems

    Chapter 3 Troubleshooting Diagnosing Problems Diagnosing Problems Common switch problems fall into the following categories: • Poor performance No connectivity • • Corrupted software Table 3-2 describes how to detect and resolve these problems. Catalyst 3500 Series XL Hardware Installation Guide 78-6456-04...
  • Page 94 Table 3-2 Common Problems and Their Solutions Symptom Possible Cause Resolution Poor performance or excessive Duplex autonegotiation mismatch. See the Cisco IOS Desktop errors. Switching Software Configuration Guide for information on identifying autonegotiation mismatches. Cabling distance exceeded. Port statistics show excessive •...
  • Page 95 Chapter 3 Troubleshooting Diagnosing Problems Table 3-2 Common Problems and Their Solutions (continued) Symptom Possible Cause Resolution No connectivity. Incorrect or bad cable. The following are indicated by no • For the correct pinouts and link at both ends: the proper application of crossover vs.
  • Page 96 • Use the show POST • detected. command to see which POST test failed. Cisco IP Phone fails to power on Improper cabling. Make sure the switch is when connected to a connected to the LAN-to-phone Catalyst 3524-PWR XL switch.

  • Page 97: Appendix

    A P P E N D I X Technical Specifications Table A-1, Table A-2, and Table A-3, list the technical specifications for the Catalyst 3500 series XL switches. Table A-4 lists the regulatory agency approvals. Table A-1 Technical Specifications for the Catalyst 3508G XL Switch Environmental Ranges Operating temperature 32 to 113°F (0 to 45°C)
  • Page 98 Appendix A Technical Specifications Table A-2 Technical Specifications for the Catalyst 3512, 3524, and 3548 XL Switches Catalyst 3512 XL Catalyst 3524 XL Catalyst 3548 XL Environmental Ranges Operating 32 to 113°F (0 to 45°C) 32 to 113°F (0 to 45°C) 32 to 113°F (0 to 45°C) temperature Storage...
  • Page 99 Appendix A Technical Specifications Table A-3 Technical Specifications for the Catalyst 3524-PWR XL Switch Environmental Ranges Operating temperature 32 to 113°F (0 to 45°C) Storage temperature –4 to 149°F (–10 to 65°C) Operating humidity 10 to 85% (noncondensing) Operating altitude Up to 10,000 ft (3000 m) Storage altitude Up to 15,000 ft (4570 m)
  • Page 100 Appendix A Technical Specifications Catalyst 3500 Series XL Hardware Installation Guide 78-6456-04...

  • Page 101: Appendix

    Figure B-1 shows the pinout. When connecting the 10/100 ports to compatible workstations, servers, routers, and Cisco IP Phones, you must use a straight-through cable wired for 10BaseT and 100BaseTX (Figure B-5 illustrates the straight-through cable schematics).

  • Page 102: 1000Basex Ports

    Appendix B Connector and Cable Specifications Connector Specifications Figure B-1 10/100 Port Pinouts Label 4 5 6 7 8 1000BaseX Ports 1000BaseX ports use duplex SC connectors, as shown in Figure B-2. Figure B-2 1000BaseX SC Connector Catalyst 3500 Series XL Hardware Installation Guide 78-6456-04...

  • Page 103: Gigastack Port

    PC. You need to provide a RJ-45-to-DB-25 female DTE adapter if you want to connect the switch console port to a terminal. You can order a kit (part number ACS-DSBUASYN=) containing that adapter from Cisco. For console port and adapter pinout information, see Table B-1 Table B-2.

  • Page 104: Cable And Adapter Specifications

    Appendix B Connector and Cable Specifications Cable and Adapter Specifications Cable and Adapter Specifications Crossover and Straight-Through Cable Pinouts The schematics of crossover and straight-through cables are shown in Figure B-4 and Figure B-5. Figure B-4 Crossover Cable Schematic Switch Switch 3 TD+ 3 TD+...

  • Page 105: Rollover Cable And Adapter Pinouts

    Appendix B Connector and Cable Specifications Cable and Adapter Specifications Rollover Cable and Adapter Pinouts Identifying a Rollover Cable To identify a rollover cable, compare the two modular ends of the cable. Hold the cable ends side-by-side, with the tab at the back. The wire connected to the pin on the outside of the left plug should be the same color as the wire connected to the pin on the outside of the right plug (see Figure B-6).

  • Page 106: Connecting To A Pc

    Appendix B Connector and Cable Specifications Cable and Adapter Specifications Connecting to a PC Use the supplied thin, flat, RJ-45-to-RJ-45 rollover cable and RJ-45-to-DB-9 female DTE adapter to connect the console port to a PC running terminal-emulation software. Figure B-7 shows how to connect the console port to a PC.

  • Page 107: Connecting To A Terminal

    DTE adapter. The RJ-45-to-DB-25 female DTE adapter is not supplied with the Note switch. You can order a kit (part number ACS-DSBUASYN=) containing this adapter from Cisco. Table B-2 Console Port Signaling and Cabling Using a DB-25 Adapter Console...
  • Page 108 Appendix B Connector and Cable Specifications Cable and Adapter Specifications Catalyst 3500 Series XL Hardware Installation Guide 78-6456-04...

  • Page 109: Appendix

    A P P E N D I X Translated Safety Warnings This appendix repeats in multiple languages the warnings in this guide. These translated warnings can be used with other documents related to this guide. Catalyst 3500 Series XL Hardware Installation Guide 78-6456-04...

  • Page 110: Attaching The Cisco Rps (Model Pwr600-Ac-Rps

    Attaching the Cisco RPS (model PWR600-AC-RPS) Attaching the Cisco RPS (model PWR600-AC-RPS) This warning applies to the Catalyst 3508, 3512, 3524, and 3548 XL switches. Attach only the Cisco RPS (model PWR600-AC-RPS) to the RPS receptacle. Warning Statement 100 Waarschuwing Slechts de Cisco RPS (model PWR600-AC-RPS) aan de RPS contactdoos verbinden.
  • Page 111 Appendix C Translated Safety Warnings Attaching the Cisco RPS (model PWR600-AC-RPS) Catalyst 3500 Series XL Hardware Installation Guide 78-6456-04...

  • Page 112: Attaching The Cisco Rps (Model Pwr300-Ac-Rps-N1

    Attaching the Cisco RPS (model PWR300-AC-RPS-N1) Attaching the Cisco RPS (model PWR300-AC-RPS-N1) This warning applies to the Catalyst 3524-PWR XL switch. Attach only the Cisco RPS (model PWR300-AC-RPS-N1) to the RPS receptacle. Warning Statement 100B Waarschuwing Slechts de Cisco RPS (model PWR300-AC-RPS-N1) aan de RPS contactdoos verbinden.

  • Page 113: Service Personnel Warning

    Appendix C Translated Safety Warnings Service Personnel Warning Service Personnel Warning This equipment is to be installed and maintained by service personnel only as Warning defined by AS/NZS 3260 Clause 1.2.14.3 Service Personnel. Statement 88 Waarschuwing Deze apparatuur mag slechts geïnstalleerd en onderhouden worden door servicepersoneel conform de definitie van AS/NZS 3260 Clausule 1.2.14.3 Service Personnel.
  • Page 114 Appendix C Translated Safety Warnings Service Personnel Warning Aviso Este equipamento deverá ser instalado e reparado apenas por pessoal de manutenção qualificado, conforme estipulado em AS/NZS 3260 Cláusula 1.2.14.3 Service Personnel. ¡Advertencia! Este equipo se debe instalar y mantener solamente por personal de servicio, según definido por AS/NZS 3260 Cláusula 1.2.14.3 Service Personnel.

  • Page 115: Qualified Personnel Warning

    Appendix C Translated Safety Warnings Qualified Personnel Warning Qualified Personnel Warning Warning Only trained and qualified personnel should be allowed to install or replace this equipment. Statement 49 Waarschuwing Installatie en reparaties mogen uitsluitend door getraind en bevoegd personeel uitgevoerd worden. Varoitus Ainoastaan koulutettu ja pätevä...
  • Page 116 Appendix C Translated Safety Warnings Qualified Personnel Warning Catalyst 3500 Series XL Hardware Installation Guide 78-6456-04...

  • Page 117: Installation Instructions Warning

    Appendix C Translated Safety Warnings Installation Instructions Warning Installation Instructions Warning Warning Read the installation instructions before connecting the system to the power source. Statement 1004 Waarschuwing Raadpleeg de installatie-instructies voordat u het systeem op de voedingsbron aansluit. Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen. Attention Avant de brancher le système sur la source d'alimentation, consulter les directives d'installation.

  • Page 118: Jewelry Removal Warning

    Appendix C Translated Safety Warnings Jewelry Removal Warning Jewelry Removal Warning Warning Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld the metal object to the terminals.
  • Page 119 Appendix C Translated Safety Warnings Jewelry Removal Warning Warnung Vor der Arbeit an Geräten, die an das Netz angeschlossen sind, jeglichen Schmuck (einschließlich Ringe, Ketten und Uhren) abnehmen. Metallgegenstände erhitzen sich, wenn sie an das Netz und die Erde angeschlossen werden, und können schwere Verbrennungen verursachen oder an die Anschlußklemmen angeschweißt werden.
  • Page 120 Appendix C Translated Safety Warnings Jewelry Removal Warning Catalyst 3500 Series XL Hardware Installation Guide C-12 78-6456-04...

  • Page 121: Stacking The Chassis Warning

    Appendix C Translated Safety Warnings Stacking the Chassis Warning Stacking the Chassis Warning Warning Do not stack the chassis on any other equipment. If the chassis falls, it can cause severe bodily injury and equipment damage. Statement 48 Waarschuwing Het chassis mag niet op andere apparatuur gestapeld te worden. Als het chassis mocht vallen, kan dit ernstig lichamelijk letsel en beschadiging van de apparatuur veroorzaken.
  • Page 122 Appendix C Translated Safety Warnings Stacking the Chassis Warning Catalyst 3500 Series XL Hardware Installation Guide C-14 78-6456-04...

  • Page 123: Main Disconnecting Device

    Appendix C Translated Safety Warnings Main Disconnecting Device Main Disconnecting Device Warning The plug-socket combination must be accessible at all times because it serves as the main disconnecting device. Statement 66 Waarschuwing De combinatie van de stekker en het elektrisch contactpunt moet te allen tijde toegankelijk zijn omdat deze het hoofdmechanisme vormt voor verbreking van de aansluiting.

  • Page 124: Overtemperature Warning

    Appendix C Translated Safety Warnings Overtemperature Warning Overtemperature Warning Warning To prevent the switch from overheating, do not operate it in an area that exceeds the maximum recommended ambient temperature of 113°F (45°C). To prevent airflow restriction, allow at least 3 inches (7.6 cm) of clearance around the ventilation openings.
  • Page 125 Appendix C Translated Safety Warnings Overtemperature Warning Advarsel For å unngå at bryteren overopphetes skal utstyret ikke brukes på steder hvor anbefalt maks omgivelsestemperatur overstiger 113 grader Farenheit (45°C). La det være minst 3 tommer (7,6 cm) klaring rundt ventilasjonsåpningene for at luftsirkulasjonen skal være uhindret.
  • Page 126 Appendix C Translated Safety Warnings Overtemperature Warning Catalyst 3500 Series XL Hardware Installation Guide C-18 78-6456-04...

  • Page 127: Tn Power Warning

    Appendix C Translated Safety Warnings TN Power Warning TN Power Warning The device is designed to work with TN power systems. Statement 19 Warning Waarschuwing Het apparaat is ontworpen om te functioneren met TN energiesystemen. Varoitus Koje on suunniteltu toimimaan TN-sähkövoimajärjestelmien yhteydessä. Attention Ce dispositif a été...

  • Page 128: Ground Connection Warning

    Appendix C Translated Safety Warnings Ground Connection Warning Ground Connection Warning Warning When installing the unit, always make the ground connection first and disconnect it last. Statement 42 Waarschuwing Bij de installatie van het toestel moet de aardverbinding altijd het eerste worden gemaakt en het laatste worden losgemaakt.

  • Page 129: Circuit Breaker (15A) Warning

    Appendix C Translated Safety Warnings Circuit Breaker (15A) Warning Circuit Breaker (15A) Warning This product relies on the building’s installation for short-circuit (overcurrent) Warning protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on the phase conductors (all current-carrying conductors).
  • Page 130 Appendix C Translated Safety Warnings Circuit Breaker (15A) Warning Warnung Dieses Produkt ist darauf angewiesen, daß im Gebäude ein Kurzschluß- bzw. Überstromschutz installiert ist. Stellen Sie sicher, daß eine Sicherung oder ein Unterbrecher von nicht mehr als 240 V Wechselstrom, 10 A (bzw. in den USA 120 V Wechselstrom, 15 A) an den Phasenleitern (allen stromführenden Leitern) verwendet wird.

  • Page 131: Grounded Equipment Warning

    Appendix C Translated Safety Warnings Grounded Equipment Warning Grounded Equipment Warning Warning This equipment is intended to be grounded. Ensure that the host is connected to earth ground during normal use. Statement 39 Waarschuwing Deze apparatuur hoort geaard te worden Zorg dat de host-computer tijdens normaal gebruik met aarde is verbonden.

  • Page 132: Supply Circuit Warning

    Appendix C Translated Safety Warnings Supply Circuit Warning Supply Circuit Warning Care must be given to connecting units to the supply circuit so that wiring is Warning not overloaded. Statement 51 Waarschuwing Let erop dat de toestellen op voedingscircuits worden aangesloten zonder het vermogen van de bedrading te overschrijden.

  • Page 133: No On/Off Switch Warning

    Appendix C Translated Safety Warnings No On/Off Switch Warning Aviso Deverá ter precaução ao ligar unidades ao circuito de fornecimento de energia, para não sobrecarregar a instalação. ¡Atención! Poner mucho cuidado al conectar los equipos al circuito de alimentación a fin de no sobrecargar el cableado.
  • Page 134 Appendix C Translated Safety Warnings No On/Off Switch Warning Aviso Antes de começar a trabalhar num sistema que não possua um interruptor ON/OFF, desligue o cabo de alimentação. ¡Advertencia! Antes de trabajar sobre cualquier sistema que carezca de interruptor de Encendido/Apagado (ON/OFF), desenchufar el cable de alimentación.

  • Page 135: Power Supply Warning

    Appendix C Translated Safety Warnings Power Supply Warning Power Supply Warning Warning Do not touch the power supply when the power cord is connected. For systems with a power switch, line voltages are present within the power supply even when the power switch is off and the power cord is connected. For systems without a power switch, line voltages are present within the power supply when the power cord is connected.
  • Page 136 Appendix C Translated Safety Warnings Power Supply Warning Avvertenza Non toccare l’alimentatore se il cavo dell’alimentazione è collegato. Per i sistemi con un interruttore di alimentazione, tensioni di linea sono presenti all’interno dell’alimentatore anche quando l’interruttore di alimentazione è en posizione di disattivazione (off), se il cavo dell’alimentazione è...
  • Page 137 Appendix C Translated Safety Warnings Power Supply Warning Catalyst 3500 Series XL Hardware Installation Guide C-29 78-6456-04...

  • Page 138: Work During Lightning Activity Warning

    Appendix C Translated Safety Warnings Work During Lightning Activity Warning Work During Lightning Activity Warning Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001 Waarschuwing Tijdens onweer dat gepaard gaat met bliksem, dient u niet aan het systeem te werken of kabels aan te sluiten of te ontkoppelen.

  • Page 139: Product Disposal Warning

    Appendix C Translated Safety Warnings Product Disposal Warning Product Disposal Warning Ultimate disposal of this product should be handled according to all national Warning laws and regulations. Statement 1040 Waarschuwing Het uiteindelijke wegruimen van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen.
  • Page 140 Appendix C Translated Safety Warnings Product Disposal Warning Aviso Deitar fora este produto em conformidade com todas as leis e regulamentos nacionais. ¡Advertencia! Al deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales. Varning! Vid deponering hanteras produkten enligt gällande lagar och bestämmelser. Catalyst 3500 Series XL Hardware Installation Guide C-32 78-6456-04...

  • Page 141: Chassis Warning-Rack-Mounting And Servicing

    Appendix C Translated Safety Warnings Chassis Warning—Rack-Mounting and Servicing Chassis Warning—Rack-Mounting and Servicing Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety: •...
  • Page 142 Appendix C Translated Safety Warnings Chassis Warning—Rack-Mounting and Servicing Attention Pour éviter toute blessure corporelle pendant les opérations de montage ou de réparation de cette unité en casier, il convient de prendre des précautions spéciales afin de maintenir la stabilité du système. Les directives ci-dessous sont destinées à...
  • Page 143 Appendix C Translated Safety Warnings Chassis Warning—Rack-Mounting and Servicing Advarsel Unngå fysiske skader under montering eller reparasjonsarbeid på denne enheten når den befinner seg i et kabinett. Vær nøye med at systemet er stabilt. Følgende retningslinjer er gitt for å verne om sikkerheten: •...
  • Page 144 Appendix C Translated Safety Warnings Chassis Warning—Rack-Mounting and Servicing Varning! För att undvika kroppsskada när du installerar eller utför underhållsarbete på denna enhet på en ställning måste du vidta särskilda försiktighetsåtgärder för att försäkra dig om att systemet står stadigt. Följande riktlinjer ges för att trygga din säkerhet: •...
  • Page 145 Appendix C Translated Safety Warnings Chassis Warning—Rack-Mounting and Servicing • • • • • • Catalyst 3500 Series XL Hardware Installation Guide C-37 78-6456-04...

  • Page 146: Chassis Power Connection Warning

    Appendix C Translated Safety Warnings Chassis Power Connection Warning Chassis Power Connection Warning Warning Before connecting or disconnecting ground or power wires to the chassis, ensure that power is removed from the DC circuit. To ensure that all power is OFF, locate the circuit breaker on the panel board that services the DC circuit, switch the circuit breaker to the OFF position, and tape the switch handle of the circuit breaker in the OFF position.
  • Page 147 Appendix C Translated Safety Warnings Chassis Power Connection Warning Avvertenza Prima di collegare o distaccare i cavi elettrici o di messa a terra dallo chassis, assicuratevi che il circuito DC non sia alimentato. Per verificare che tutta l'alimentazione sia scollegata (OFF), individuare l'interruttore automatico sul quadro strumenti che alimenta il circuito CC, mettere l'interruttore in posizione OFF e fissarlo con nastro adesivo in tale posizione.
  • Page 148 Appendix C Translated Safety Warnings Chassis Power Connection Warning Catalyst 3500 Series XL Hardware Installation Guide C-40 78-6456-04...

  • Page 149: Shock Hazard From Interconnections Warning

    Appendix C Translated Safety Warnings Shock Hazard from Interconnections Warning Shock Hazard from Interconnections Warning Warning Voltages that present a shock hazard can exist on inline power circuits if interconnections are made by using uninsulated exposed metal contacts, conductors, or terminals. Avoid using such interconnection methods unless the exposed metal parts are in a restricted access location and users and service people who are authorized to access the location are made aware of the hazard.
  • Page 150 Appendix C Translated Safety Warnings Shock Hazard from Interconnections Warning Warnung In Inline-Stromkreisen besteht Stromschlaggefahr, wenn Verbindungen unter Verwendung nicht isolierter, freiliegender Metallkontakte, Leiter oder Anschlussklemmen hergestellt werden. Vermeiden Sie das Herstellen solcher Verbindungen, es sei denn, die freiliegenden Metallteile befinden sich an Stellen mit beschränktem Zugriff, und Personen, die berechtigt sind, auf diese Stellen zuzugreifen, sind sich der Gefahr bewusst.
  • Page 151 Appendix C Translated Safety Warnings Shock Hazard from Interconnections Warning ¡Advertencia! Puede haber voltajes con riesgo de shock en circuitos eléctricos en línea, si para las interconexiones se utilizan contactos, conductores o terminales metálicos descubiertos. Evite tales métodos de interconexión a menos que las partes metálicas descubiertas se encuentren en un lugar de acceso restringido y tanto los usuarios como el personal de servicios sean conscientes de la existencia de tal riesgo.
  • Page 152 Appendix C Translated Safety Warnings Shock Hazard from Interconnections Warning Catalyst 3500 Series XL Hardware Installation Guide C-44 78-6456-04...

  • Page 153: I N D E X

    I N D E X addresses, assigning IP 2-26 Numerics agency approvals 10/100 ports altitude A-1, A-2, A-3 cable lengths applications (network examples) 1-25 cables and connectors B-1 to B-2 autonegotiation connecting to 2-18 described groupings illustrated bandwidth utilization 1-19, 1-20 1000BaseX ports BOOTP 2-29...
  • Page 154 C-33 circuit breaker (15A) warning C-21 10/100 ports B-1 to B-2 Cisco Access Analog Trunk Gateway 1000BaseX ports 1-33 B-2 to B-3 Cisco Access Digital Trunk Gateway 1-33 console port B-3 to B-7...
  • Page 155 Index diagnostics connecting to 2-31 2-20 dimensions installing documentation supported related publications xviii GigaStack GBIC 1-9, 1-26 document conventions cable lengths duplex LED 1-17, 1-18 connecting to 2-22 connector installing ground connection warning C-20 grounded equipment warning C-23 electrical noise, avoiding electromagnetic interference (EMI) EMC regulatory statements Enterprise Edition software, switches...
  • Page 156 Index IOS command-line interface line power 1-25 IP address procedures See inline power 2-24 IP setup 2-26 management features and defaults 2-30 jewelry removal warning Mode button C-10 1-11, 1-16 Mode label (on Catalyst 3548 XL only) 1-16 models, switch mounting, table or desk 2-17 mounting brackets...
  • Page 157 Index PC, connecting to switch power connectors 2-23 1-21 to 1-22 performance power on 2-17 network design power specifications 1-25 A-1, A-2, A-3 performance problems, solving power supply performance tuning features AC power outlet 2-30 1-23 personnel warning RPS connector 1-22 pinouts warning...
  • Page 158 Index See RPS straight-through cable pinouts regulatory statements, EMC SunNet Manager 1-25 RJ-45 connector, console port supply circuit warning 2-24, B-3 C-24 RJ-45 console port 1-21 switch rollover cable applications 2-24, B-5, B-6 1-25 startup connecting to powering on 2-17 2-17 connector system LED...
  • Page 159 Index Visual Switch Manager (VSM) 1-24 1-24 wall-mounting 2-15 to 2-16 warnings defined xiii installation translated Catalyst 3500 Series XL Hardware Installation Guide IN-7 78-6456-04...
  • Page 160 Index Catalyst 3500 Series XL Hardware Installation Guide IN-8 78-6456-04...

This manual is also suitable for:

3508g - catalyst xl standard edition switch3550-24 - catalyst smi switch3560 24ps - catalyst smi switch3560-48ps - catalyst switch3560g-48ps - catalyst switchWs-c3508g-xl-en - syst. catalyst 3508g xl switch ... Show all

Table of Contents