Table of Contents
5. Energy Management
5-1. Energy Use Status
On the Energy Use Status screen, the energy-control-related status, such as electric energy consumption,
operation time, and outdoor temperature, can be displayed in a graph. Operators can check the detailed status
of given indoor units by specifying the date to display the data per group, block, or unit address. Also, the status
of other indoor units can be displayed at the same time for comparison.
Click [Energy Management] in the menu bar, and then click [Energy Use Status] to access the Energy Use
Status screen.
Note: A separate license is required, depending on the selected date range, display range, and display item.
Display range
Display target
Date to display the data
Display item
Download
Click to export the data in
the CSV format.
Item
Date range
Display range
Display target
Date to display the
data
Comparison target
Comparison date
WT07139X01
Select [Day], [Month], or [Year].
Note: When [Day] is selected, the data for each hour between 0:00 and 24:00 of the specified date
will appear in the graph.
When [Month] is selected, the data for each day between the 1st and 31st of the specified
month will appear in the graph.
When [Year] is selected, the data for each month between January and December of the
specified year will appear in the graph.
Note: Only the data for the period during which the AE-200/AE-50 was powered on will appear in
the graph. The data for the period during which the AE-200/AE-50 was powered off will not
appear in the graph.
Select [Block], [Group], or [Address] to display its data.
Select a block name, group name, or address number to display its data.
Note: The selectable items vary, depending on the item selected in the [Display range] field.
Specify a date to display the data.
Note: When [Day] is selected as a Date range, specify "yyyy/mm/dd" from the current month or the
last 24 months.
When [Month] is selected as a Date range, specify "yyyy/mm" from the current month or the
last 24 months.
When [Year] is selected as a Date range, specify "yyyy" from the current year or the last 2
years.
Note: The date will appear in the format that has been set on the Basic System settings screen,
accessible via the Web Browser for Initial Settings.
Select a block name, group name, or address to display the comparison data.
Note: The selectable items vary, depending on the item selected in the [Display range] field.
Specify a date to display the comparison data.
Note: The same rule as for the "Date to display the data" apply.
Note: The date will appear in the format that has been set on the Basic System settings screen,
accessible via the Web Browser for Initial Settings.
Description
26
Comparison target
Date range
Refresh screen
Click to show the graph
created based on the
specified criteria.
Comparison date
Graph region
Table of Contents
