Table of Contents
5.26
Password Changing Screen
Figure 5.25 Password Changing screen
Password Changing Screen
This screen is used to create passwords that control operator access to the touchscreen
commands.
Level 1 passwords restrict access to the following screens:
Settings
Sequence
Teach
Level 2 passwords restrict access to the Configuration. Maintain and Diagnostic screens.
In order to use a Level 1 password a Level 2 password must be set.
Level 3 passwords restrict access to the following screens:
Quality limits key pads
Weld setting key pads
A Level 1, Level 2, or Level 3 password which is set to "0" turns password protection off.
The factory settings for the controller are "0" for Level 1, 3 and "2677" for Level 2.
To change a password the user must first enter the current password. If password
protection is off, enter "0" as the current password. A new password may then be entered.
A password may be up to 4 numbers Max.
Press one of the following options for this screen:
LEVEL 1
To change the Level 1 password setting.
LEVEL 2
To change the Level 2 password setting.
LEVEL 3
To change the Level 3 password setting.
RESET
To return to System Configuration.
DCM00002 REV. 15
Quality
Splices
Adjust
Make a new splice
5.24 System Configuration Screen
Teach Button
(Next).
69
Chapters
Table of Contents
Troubleshooting
