Table of Contents
HP 32435A Series III Power Supplies
Table 10-2.
DC STATUS/POWER Indicators and Switches
I----------T----------------------------------------------------
1
Indicator
1
1
or
1
Function
1
Switch
1
1
1
-----------------------------------
_
DC STATUS
BCHG
Indicator
DC STATUS
PFW
Indicator
DC STATUS
PON
Indica tor
When fUlly lighted,
indicates that the
system~s
battery is fully charged.
When slowly blinking,
ind ica tes that the battery is charging.
When rap-
idly blinking, indicates that the battery is dis-
charging.
When not 1 ighted, indica tes that the
battery is completely discharged or that the bat-
tery is not installed in the system.
When lighted,
indicates that the
system~s
input AC
power is within specifications.
When not lighted,
indicates that the AC power has dropped below
specifications and that DC power from the power
supplies may begin to decay.
When lighted,
indicates that AC power is applied
to the power supplies and that the power supplies
are operating properly.
When not lighted, indi-
cates that one or more power supplies are not op-
erating properly or that the DC voltages from the
power supplies has begun to decay due to loss of
input AC power.
DC POWER
LOGIC
Switch
DC POWER
MEMORY
Switch
When set to DISABLE, removes DC power from all
PCA's except memory to permit removal and replace-
ment of the I/O and CPU
PCA~s
without destroying
1
the contents of memory.
When set to ENABLE, ap-
I
plies
DC
power to all PCA's except memory PCA's.
I
I
When set to DISABLE, removes all
DC
power from alII
PCA's.
When set to ENABLE, applies DC power to
I
all PCA's provided that the LOGIC switch is also
1
se t to ENABLE.
I
___________ ---------------------------------------------
1
10-4
Chapters
Table of Contents
Troubleshooting
