Table of Contents
Table 2.4
Item
Ground Detect
2
(15 pin female)
3
Ground Detect (3 pins)
4
User I/O, Alarm Connector
5
Start Connector
6
Air Filter
7
Line Cord
28
Rear Panel Connectors
Description
Function
An optional 2000IW only feature - allows
ultrasonic energy to be turned off when the
horn comes in contact with your electrically
isolated fixture or anvil. Requires Ground Detect
Kit, 101-063-343. Connector 2 is 15 pin female,
connector 3 is 3 pins.
25 pin D-shell connector provides a +24V DC
interface for external controls and devices.
ALARMS, WELD ON and EXTERNAL RESET
signals are available. In addition, a READY
signal is available as both +24V DC and isolated
contact closure. Using this connector, selected
faults or weld errors sensed by the welder can
be communicated outside the welder for
monitoring cycles and sorting suspect
workpieces. Connector 4 is a 25 pin female.
Connects the welder to its base or to customer
supplied start signals. Connector 5 is a 9 pin
male.
Filters contaminants from the air entering the
welder.
Connects the welder to your power source.
1019567 REV. 03
Table of Contents
Troubleshooting
