Related Manuals for Honeywell HON 530-E-WG
Summary of Contents for Honeywell HON 530-E-WG
- Page 1 Volume Control Valve HON 530-E-WG 530-E-WG.24 OPERATING AND MAINTENANCE INSTRUCTIONS/ SPARE PARTS EDITION 01/2017 Serving the Gas Industry Worldwide...
-
Page 2: Table Of Contents
Contents Page General information Safety information Specific maintenance instructions Dismantling and replacing sealing rings Checking components, assembly 4, 5 Tightening torques Lubricants Spare parts Spare parts drawing 6, 7 3.2.1 Spare parts lists DN 200/200 to DN 250/300 8, 9 3.2.2 Spare parts lists DN 250/300 to DN 400/400 10, 11... -
Page 3: General Information
The same applies to O rings removed during disassembly. Do not use any spare/ wear parts and / or oils & lubricants not specifically recommended in the Honeywell operating and maintenance instructions for spare parts. In the event spare/wear parts and/or lubricants & oils other than those specifically recommended are used, Honeywell shall not be held liable for any defects an or consecutive damages... -
Page 4: Specific Maintenance Instructions
2. Specific maintenance instructions Under normal circumstances, maintenance jobs may be limited to the sealing elements of the drive shaft and Dismantling and replacing sealing rings • Use the electric drive to move the valve sleeve to the “UP” position. (Limit switch “UP” •... -
Page 5: Tightening Torques
• Pull the special washer (31) over the spindle (23). • Place the compensating ring (62) in the pit of the main valve body (16) provided for that purpose. • into the groove of the release sleeve (38). (Don’t forget to clean the groove.) Fill the grease chamber (48) with lubricant. -
Page 6: Spare Parts Drawing
3.1 Spare parts drawing HON 530-E-WG 52, 53 see page 07 (rotated 30 degrees) 530.24 p.06... - Page 7 Details Detail “V” Detail “Z” Detail rotated 30 degrees Detail rotated 30 degrees 52/53 54 W W 48 43 W 55 W 44 W 45 W 59 W Detail “U” Detail “Y” 59 W 530.24 p. 07...
-
Page 8: Spare Parts Lists Dn 200/200 To Dn 250/300
3.2.1 Spare parts list HON 530-E-WG DN 200/200 through DN 250/300 Part no. Denomination Num- W Material DN 200/200 DN 200/250 DN 200/300 DN 250/250 DN 250/300 VS 200 VS 200 VS 200 VS 200 Rotary drive on demand Feather key... - Page 9 Part no. Denomination Num- W Material DN 200/200 DN 200/250 DN 200/300 DN 250/250 DN 250/300 VS 200 VS 200 VS 200 VS 200 Main valve body 2, at option: Main valve body 2 PN 40 10030646 Main valve body 2 ANSI 600 RF 10030635 10030675 10030679...
-
Page 10: Spare Parts Lists Dn 250/300 To Dn 400/400
3.2.2 Spare parts list HON 530-E-WG DN 250/400 through DN 400/400 Part no. Denomination Num- W Material DN 250/400 DN 300/300 DN 300/300 DN 400/400 VS 200 VS 200 Rotary drive Feather key 26241 26241 26241 26241 Shaft 10030660 10030660... - Page 11 Part no. Denomination Num- W Material DN 250/400 DN 300/300 DN 300/300 DN 400/400 VS 200 VS 200 Special washer 10030647 10030647 10030625 10030625 Ring segment 10030645 10030645 10030779 10030615 Special washer 101316 101316 101316 101316 Housing 2 ANSI 600 RF 10031483 10030679 10030782...
-
Page 12: Parts For Maintenance Purposes
4. Parts for maintenance purposes DN 200/200 through DN 250/300 Part no. Denomination Number DN 200/200 DN 200/250 DN 200/300 DN 250/250 DN 250/300 VS 200 VS 200 VS 200 VS 200 O ring 100655 100655 100655 100655 100655 O ring 100694 100694 100694... - Page 13 For More Information To learn more about Honeywell’s Advanced Gas Solutions, visit www.honeywellprocess.com or contact your Honeywell account manager GERMANY Honeywell Process Solutions Honeywell Gas Technologies GmbH Osterholzstrasse 45 34123 Kassel, Germany Tel: +49 (0)561 5007-0 HON 530-E-WG.24 2017-01 Fax: +49 (0)561 5007-107...