Table of Contents
2 Material damage
avoid
Follow these instructions to avoid
damage to property and the device.
NB!
Incorrect dosage of fabric softeners,
detergents, care products and
cleaning agents can affect the
operation of the appliance.
Follow the manufacturer's
▶
dosage recommendations.
Exceeding the maximum load
quantity will affect the operation of
the device.
Maintain and do not exceed the
▶
maximum load for each program.
→ "Programs", page 26
Overheating of the device can affect
the operation of the device.
Keep the air inlet of the device
▶
clear during operation.
Ensure sufficient ventilation in the
▶
room.
Light objects, such as hair and fluff,
can be sucked into the air inlet of the
device during operation and affect the
operation of the device.
Keep the area clean while using
▶
the device.
Keep light objects away from the
▶
device.
Operation with missing, incomplete or
defective fluff protection (depending
on the device equipment, e.g. fluff
filter, fluff container, filter mat) can
lead to damage to the device.
Do not use the device with missing,
▶
incomplete or defective lint
protection.
Avoid material damageNL
Foam or foam rubber can deform or
melt when drying.
Do not dry laundry containing
▶
foam or foam rubber.
Unsuitable cleaning agents can
damage the surfaces of the device.
Do not use sharp or abrasive
▶
cleaning agents.
Do not use cleaning agents
▶
containing strong alcohol.
▶ Do not use hard scouring or
dishwashing sponges.
Clean the device only with water
▶
and a soft, damp cloth.
▶ Immediately remove all detergent
residues, spray residues or residues
upon contact with the device.
3 Environmental protection and
saving
3.1 Disposal of the packaging
The packaging materials are
environmentally friendly and can be
reused.
Dispose of the individual
▶
components separately by type.
3.2 Save energy
If you follow these directions, your
device will use less power.
Use the device in a well-ventilated
area and keep the air inlet of the
device clear.
aImpeded air exchange
extends program duration and
increases energy consumption.
11
Table of Contents
