Table of Contents
Available languages
Available languages
h. Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
5. Battery Tool Use and Care
manufacturer. A charger that is suitable for one type
with another battery pack.
battery packs. Use of any other battery packs may create
c. When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
the battery; avoid contact. If contact accidentally
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
e. Do not use a battery pack or tool that is damaged or
injury.
excessive temperature.
above 265 °F (130 °C) may cause explosion.
g. Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
6. Service
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
b. Never service damaged battery packs. Service of
battery packs should only be performed by the
manufacturer or authorized service providers.
Safety warnings common for grinding, sanding,
wire brushing, polishing, carving or abrasive
cutting-off operations
a. This power tool is intended to function as a grinder,
sander, wire brush, polisher, carving or cut off tool.
Charging improperly or at
(Original instructions)
(Original instructions)
designed and recommended by the tool manufacturer.
Just because the accessory can be attached to your
power tool, it does not assure safe operation.
c. The rated speed of the accessory must be at least
tool. Accessories running faster than their rated speed
d. The outside diameter and the thickness of your
accessory must be within the capacity rating of your
power tool. Incorrectly sized accessories can not be
adequately guarded or controlled.
e. The arbour size of wheels, sanding drums or any
of the power tool. Accessories that do not match the
mounting hardware of the power tool will run out of
balance, vibrate excessively and may cause loss of
control.
f. Mandrel MOUNTED WHEELS, sanding drums, cutters
or other accessories must be fully inserted into the
collet or chuck.
the overhang of the wheel is too long,the MOUNTED
WHEEL may become loose and be ejected at high
velocity.
g. Do not use a damaged accessory. Before each use
inspect the accessory such as abrasive wheel for
chips and cracks, backing pad for cracks, tear or
excess wear, wire brush for loose or cracked wires. If
power tool or accessory is dropped, inspect for
damage or install an undamaged accessory. After
inspecting and installing an accessory, position
yourself and bystanders away from the plane of the
rotating accessory and run the power tool at
maximum no-load speed for one minute. Damaged
accessories will normally break apart during this test time.
application, use face shield, safety goggles or safety
glasses. As appropriate, wear dust mask, hearing
protectors, gloves and workshop apron capable of
stopping small abrasive or workpiece fragments. The
generated by various operations. The dust mask or
by your operation. Prolonged exposure to high intensity
noise may cause hearing loss.
i. Keep bystanders a safe distance away from work
area. Anyone entering the work area must wear
away and cause injury beyond immediate area of
operation.
j. Hold power tool by insulated gripping surfaces only,
English
ENGLISH
5
5
Table of Contents
