Optical And Acoustic Signals; Acknowledging A Message; Silence Internal Buzzer; Activate And Silence Signaling Devices - Bosch AVENAR panel 8000 Manual

Hide thumbs Also See for AVENAR panel 8000:
Table of Contents
Available languages

Available languages

42
pt-BR | Fire alarm
10.2

Optical and acoustic signals

If the transmission device to the fire department is activated, the
10.3

Acknowledging a message

There are two ways to acknowledge messages:
Aviso!
i
If Ir para Reconhecer is displayed, select this field in order to display the messages that have
not yet been acknowledged.
10.4

Silence internal buzzer

Press the following key to temporarily silence the internal buzzer:
The internal signal tone is silenced.
10.5

Activate and silence signaling devices

Sounders and optical signaling devices which have been activated can be switched off.
4
Aviso!
i
On the next alarm message, all signaling devices that have been switched off are switched
back on automatically.
4
10.6

Resetting signaling devices and transmission devices

4
Aviso!
i
The display automatically changes back to alarm indication after 30 seconds. To return to the
alarm indication before 30 seconds have elapsed, select Incêndio.
2023-08 | 8.0 | F.01U.378.877
Rosa Fúcsia: grupos ativamente controlados sem um alarme real, por exemplo, em caso
de exercício de simulação de incêndio
Verde: os grupos que não estão ativos
Amarelo: grupos com falha ou desativados, não é possível controlá-los.
The alarm LED
and the evacuation LED
An internal buzzer sounds; see also Silence internal buzzer, página 42 .
Depending on the configuration, sounders and/or visual notification appliances (e.g.
sirens, strobes) are activated.
Select Reconhecer. Only those alarm messages which are visible in the display are
acknowledged.
Select a message and then press Reconhecer. Only the selected message is
acknowledged.
Select Sonoros OFF.
The sounder and/or optical signaling device is switched off.
To switch the notification appliance back on, select Sonoros ON.
The signaling devices are switched on again.
To reset control or transmission devices, select Controlo in the status bar
Manual do utilizador
AVENAR panel 8000 | AVENAR panel 2000 |
AVENAR keypad 8000
light up red
LED icon lights up red:
Bosch Sicherheitssysteme GmbH

Hide quick links:

Table of Contents
loading

Table of Contents