Available languages
Available languages
Quick Links
2-639-432-11 (1)
Cordless Headphones
Auriculares inalámbricos
Operating Instructions
Manual de instrucciones
MV-01HP
© 2005 Sony Corporation
Printed in Korea
Notes on Batteries
English
• Do not attempt to charge dry batteries.
• Do not carry batteries together with
coins or other metallic objects. Heat can
WARNING
be generated if the positive and negative
terminals accidentally come into contact
To prevent fire or shock hazard,
with metallic objects.
do not expose the unit to rain or
• If you are not going to use the unit for a
moisture.
long time, remove the batteries to avoid
damage from battery leakage or
corrosion.
• Do not remove the attached label.
Welcome!
• Do not crack the casing.
• Do not drop, or subject to shock.
Thank you for purchasing the Sony MV-
• Do not solder the terminals.
01HP Cordless Headphones. Before
• Do not leave in an extremely hot or
operating the unit, please read this manual
humid place.
thoroughly and retain it for future
• When storing or discarding, insulate the
reference.
terminal portion with tape.
• Do not allow to get wet.
The MV-01HP is a cordless stereo
headphone using infrared transmission.
When to replace the batteries
You can enjoy listening to a programme
When the batteries become weak, the
free from the restriction of the headphone
POWER indicator light dims, or sound
cord.
becomes distorted or noisy. Replace the
batteries with new ones as soon as
• Cordless, noiseless infrared headphone
possible.
resistant to external noise, etc.
• Self-adjusting headband mechanism
eliminating the need for headband
adjustment.
N Operating the system
• Single VOL control adjusts both the right
and left volume of the headphones.
Listening to a
• Use with car monitors with built-in
infrared transmitter.
program
Before listening
N Getting started
• The transmitter for the headphones is on
the display monitor.
Inserting the
• To prevent your ears from being
damaged, first lower the volume.
batteries
1
Turn on the display monitor.
1
Open the lid ( ) of the left
2
Set the power switch to ON on the
housing.
left housing of the headphones.
The headphones turn on and the
POWER indicator glows red.
Lid (
)
2
Insert size AAA dry batteries into
the battery compartment,
Power (ON/OFF)
matching the battery 3 terminals
switch
POWER indicator
with the 3 marks in the
3
Put on the headphones.
compartment.
Be sure to put the right housing (R) on
your right ear and the left housing (L)
on your left ear.
AAA dry
battery
4
Start playback.
3
Close the lid ( ).
Lid (
)
5
Turn the VOL control dial to adjust
N Additional information
the volume.
If the infrared sensors of the
Precautions
headphones are covered by your hands
when adjusting the volume, the
• The driver must not use the headphones.
attenuate function will be activated and
It may lead to distraction and cause an
volume cannot be adjusted. To adjust
accident.
the volume, move closer to the
• If the headphones are used while
transmitter of the monitor, or orient the
exposed to direct sunlight, sensitivity of
infrared emitters towards the
the infrared sensors may deteriorate, and
transmitter of the monitor.
inferior quality sound may result.
• When the headphones are not to be used
for a long period of time, remove the
batteries to avoid damage caused by
battery leakage and subsequent
VOL control dial
corrosion.
• Do not leave the headphones in a
Note
location subject to direct sunlight, heat or
The volume of the headphones cannot be
moisture (it is recommended to use the
adjusted with the car monitors or card
headphones at a temperature of between
remote commander. Use the volume
5 ˚C and 35 ˚C).
control on the headphones.
• Do not drop, hit or otherwise subject the
headphones to excessive shock of any
Sound is automatically attenuated if
kind, as this could damage the product.
noise increases
• If you leave the headphones in direct
— Attenuate function
sunlight, on a dash board etc., the battery
If the infrared rays are obstructed, or the
may leak and burst, and cause an injury.
headphones are used outside their effective
Notes on headphones preventing
range, noise will increase and sound will
hearing damage
diminish. To avoid potential ear damage as
a result of noise, this function attenuates
Avoid using headphones at high volume.
any sound in the headphones. Sound is
Hearing experts advise against continuous,
loud and extended play. If you experience
automatically restored when you move
nearer to the transmitter or remove the
a ringing in your ears, lower the volume or
obstruction.
discontinue use.
After listening to the programmes
Caring for others
Take off the headphones, and then turn off
Keep the volume at a moderate level. This
the power (Noise may occur if you turn off
will allow you to hear outside sounds and
the monitor before taking off the
to be considerate to the people around you.
headphones).
If you have any questions or problems
concerning the headphones that are not
covered in this manual, please consult your
nearest Sony dealer.
Replacing the ear
pads
Troubleshooting
The ear pads are replaceable. If the ear
pads become dirty or worn out, replace
them as illustrated below.
No sound/Muffled sound
The ear pad is not commercially available.
, Turn on the display monitor first, and then
You can order replacements at your
put on the headphones.
nearest Sony dealer.
, Check that the display monitor is turned
on.
1
Remove the old ear pad by pulling
, The attenuate function is activated.
• Check if there is any object between the
it off.
transmitter and the headphones.
• Use the headphones near the
transmitter.
Ear pad
, The headphones’ POWER indicator light
dims, flashes or goes off.
• Replace the batteries with new ones.
Distorted sound
2
Place the new ear pad around the
, The headphones’ POWER indicator light
dims, flashes or goes off.
housing.
• Replace the batteries with new ones.
Loud background noise
, Move closer to the transmitter. (As you
move away from the transmitter, more
noise is likely to be heard. This is inherent
in infrared ray transmission and does not
mean that there is a problem with the
headphones.)
, Check that there are no objects between the
transmitter and the headphones.
, Check that the infrared sensors are not
obstructed by your hands or hair.
, Use the headphones away from direct
sunlight.
, The headphones’ POWER indicator light
dims, flashes or goes off.
• Replace the batteries with new ones.
Specifications
Modulation system
Frequency modulation
Carrier frequency
Right 2.8 MHz
Left
2.3 MHz
Frequency response
45 – 26,000 Hz
Power source
DC 3.0 V (size AAA) dry
batteries (2)
Mass
Approx. 140 g including
batteries
Operating temperature 5 ˚C to 35 ˚C
Design and specifications are subject to change
without notice.
Related Manuals for Sony MV-01HP
Summary of Contents for Sony MV-01HP
-
Page 1: Specifications
Welcome! • Do not crack the casing. • Do not drop, or subject to shock. Thank you for purchasing the Sony MV- • Do not solder the terminals. 01HP Cordless Headphones. Before • Do not leave in an extremely hot or operating the unit, please read this manual humid place. - Page 2 ¡Bienvenido! programa Gracias por adquirir los auriculares Antes de la recepción inalámbricos MV-01HP de Sony. Antes de • El transmisor de los auriculares se utilizar la unidad, lea este manual encuentra en la monitor de visualización. atentamente y consérvelo para consultarlo •...