Page 2
Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Hereby, Sony Corp., declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For details, please access the following URL : http://www.compliance.sony.de/...
Notes on receiving performance The system for this equipment utilizes very high frequency signals in the 800 MHz band so the receiving performance may deteriorate due to the surroundings. The following examples illustrate conditions that may reduce the possible receiving range or cause interference with reception.
N Getting started Unpacking Check that you have the following items: • The headphones • The transmitter • AC power adaptor • Unimatch plug adaptor (stereo mini jack y stereo phone plug) • Connecting cord (phono plugs y stereo mini...
Page 5
B To connect to LINE OUT or REC OUT jacks Transmitter to AUDIO IN B jack OFF ON AUDIO IN NOISE FILTER Connecting cord (supplied) Left channel Right channel (white) (red) to LINE OUT or REC OUT jacks C To connect to a headphone jack of a TV DC IN 9V 1 2 3 CHANNEL...
Volume Limiter System) function, be sure to turn the function off when using the transmitter. Otherwise, you will have to turn up the volume of the headphones, and that may cause noise. * WALKMAN is a registered trademark of Sony Corporation. Charging the headphone battery...
** The hours required to fully charge empty batteries N Operating the system Listening to a program First turn on the audio/video equipment and start playing. Remove the headphones from the transmitter. The transmitter’s power indicator will light in red. Select the radio frequency with the CHANNEL selector switch.
Page 8
Continued When you put on the headphones the headphone power turns on automatically. Turn up the volume to a moderate level with the VOL control. Press the TUNING button briefly for automatic tuning of the headphones. If you do not receive a clear audio signal, press it again.
Replacing the ear pads When the ear pads become dirty or damaged, you can get replacements from your Sony dealer. Replace them as illustrated below. Remove the old ear pad by pulling it out of the groove on the housing.
If you have any questions or problems concerning the system that are not covered in this manual, please consult the nearest Sony dealer. Be sure to bring the headphones and the transmitter to the Sony dealer when requiring repair work.
• Charge the built-in rechargeable battery or if the POWER indicator is still off after charging the built-in rechargeable battery, take the headphones to a Sony dealer for replacement of the rechargeable battery. If you connect the transmitter to LINE...
Page 12
Ελληνικά Printed in Korea Français Par la présente, Sony Corp. déclare que cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Pour de plus amples informations, veuillez vous reporter à l’URL suivante : http://www.compliance.sony.de/...