2.10.7 Access Control Levels - Bosch D9412GV3 Program Entry Manual
Hide thumbs
Also See for D9412GV3:
- Installation instructions manual (28 pages) ,
- Quick reference manual (26 pages) ,
- Operation and installation manual (76 pages)
Table of Contents
D9412GV3/D7412GV3 | Program Entry Guide | 2.0
Custom Functions
L## C Function 128 [through 143]
Default:
Refer to the program record sheet
Selection:
- or E
Function
Function Name
No.
128 through
Enable Custom
143
Function 128
through 143
Execute the desired Custom Function.
Report Levels
L## Force Arm
Default:
Refer to the program record sheet
Selection:
- or E
A user with this authority level can Force Arm.
L## Area O/C
Default:
Refer to the program record sheet
Selection:
- or E
Generates Opening and Closing Reports if the area
where this authority level is assigned sends Opening
and Closing Reports.
L## Restricted O/C
Default:
Refer to the program record sheet
Selection:
- or E
Generates an Opening Report if a bell is ringing or a
Closing Report when force or bypass arming. The
area where this authority level is assigned must be
programmed for restricted openings and closings
(refer to the A# Restrictd O/C prompt in Section
2.8.4 Open/Close Options on page 43.
L## Perimeter O/C
Default:
Refer to the program record sheet
Selection:
- or E
Generates Perimeter Opening and Closing Reports if
the area where this authority level is assigned sends
Perimeter Opening and Closing Reports. Refer to the
A# Perimeter O/C prompt on page 47 in Section
2.8.4 Open/Close Options.
Bosch Security Systems, Inc. | 10/11 | F01U170807-02
Panel and Area Wide Parameters
L## Send Duress
Default:
Selection:
Generates a Duress Report if the area where this
authority level is assigned sends duress. (Refer to
Alternate
the A# Duress Enable prompt on page 39 in Section
Keystroke
2.8.4 Open/Close Options.)
(Menu function
only)
L## Passcode Arm
Default:
Selection:
Arm an area by entering a passcode and pressing
[ENTER].
L## Passcode Disarm
Default:
Selection:
Disarm an area by entering a passcode and pressing
[ENTER].
2.10.7 Access Control Levels
L## Security Level
Default:
Selection:
M
P
D
-
Security Level [TOKEN FUNCTION]
When the user presents a token or card at the
reader, access is granted only when the user has the
authority to enter the area under certain armed
conditions.
Get other manuals https://www.bkmanuals.com
Refer to the program record sheet
- or E
Refer to the program record sheet
- or E
Refer to the program record sheet
- or E
Refer to the program record sheet
M, P, D, or -
Users have access rights for this
area when the area is in any armed
state.
Users have access rights for this
area when the area is Perimeter
Armed or Disarmed but not while the
area is Master Armed.
Users have access rights for this
area only while it is disarmed.
Users do not have access rights to
this area.
EN | 75
Hide quick links:
Table of Contents
