User System Mode; Outline Of User System Mode - Toshiba B-EX Series Key Operation Specification
Hide thumbs
Also See for B-EX Series:
- Operation manual (95 pages) ,
- Key operation specification (149 pages) ,
- Operation manual (152 pages)
Table of Contents
9 USER SYSTEM MODE
9.1 OUTLINE OF USER SYSTEM MODE
The printer enters the user system mode when the following operation is performed from the online state.
・ Press the [PAUSE] key to place the printer in a pause state, then hold down the [RESTART] key for
a few seconds.
・ Hold down the [MODE] key for a few seconds.
The user system mode is intended for performing various parameter settings.
The key operations for the user system mode are described below.
For the key operations, follow Section 7.1 LIST BOX WITH SCROLLBAR.
Display
Top menu
QM/QQ/CN models
<1>RESET
<2>PARAMETER SET
<3>ADJUST SET
<4>LAN/WLAN
<5>BASIC
<6>EMULATION
<7>AUTO CALIB
<8>DUMP MODE
<9>LOG
<1>RESET
<2>PARAMETER SET
<3>ADJUST SET
<4>LAN/WLAN
<5>BASIC
<6>EMULATION
<6>Z-MODE
<7>AUTO CALIB
<8>DUMP MODE
<9>LOG
<10> ISSUE CONTROL
<11> SHOW ISSUE CODE
Earlier than V2.1
<1>RESET
<2>PARAMETER SET
<3>ADJUST SET
<4>LAN/WLAN
<5>BASIC
<6>Z-MODE
<7>AUTO CALIB
<8>DUMP MODE
<9>LOG
Same as 8.16 RESET of the system mode.
Same as 8.4 PARAMETER SET of the system mode
Same as 8.5ADJUST SET of the system mode
Used to select the network device to be used. The detailed settings for the
network need to be done in the system mode.
Same as 8.10 BASIC of the system mode
Same as 8.14 EMULATION MODE of the system mode
Used to enable or disable the auto calibration function.
Used to print or save the data sent from the host in a USB memory.
Used to save print logs in a USB memory.
Used to set the issue control items (sensor type, print speed, direction,
etc.).
Used to display the settng values for the issue conditions (sensor type,
print speed, direction, etc.).
163
B-EX4T3-HS
V2.1 or later
<1>RESET
<2>PARAMETER SET
<3>ADJUST SET
<4>LAN/WLAN
<5>BASIC
<6>Z-MODE
<7>AUTO CALIB
<8>DUMP MODE
<9>LOG
<10>ISSUE CONTROL
<11>SHOW ISSUE COND
Table of Contents
