Back Adj - Toshiba B-EX Series Key Operation Specification
Hide thumbs
Also See for B-EX Series:
- Operation manual (95 pages) ,
- Key operation specification (149 pages) ,
- Operation manual (152 pages)
Table of Contents
8.5.3 BACK ADJ.
Max.
Min. value
value
9.9
-9.9
Note:
There may be cases where a label is not returned to the home position depending on the print
conditions, even if the media is fed backward for the same amount as the forward feeding. For
issuing media with the media sensor, if the label pitch is almost the same as the distance
between the print head and the media sensor (75.5 mm), the media may not be returned to the
home position when operations including reverse feeding (such as cut issuing, strip issuing,
automatic forward-feeding) are performed. It may result in an error. To prevent this error from
occurring, increase the reverse feed amount by performing the reverse feed amount fine
adjustment in the positive (+) direction.
Step
Display
0.1
Decimal
+0.0 mm
+3.0 mm
-3.0 mm
104
Sign
Integer
Decimal
digit
Exist
1
Print start position
(Home position after backward feeding)
Print start position
(Home position after backward feeding)
Print start position
(Home position after backward feeding)
0-padding
place
measure
1
None
Unit of
mm
Table of Contents
