Table of Contents
Available languages
Available languages
en
Switching the
appliance on
Fig. 2
Switch on the appliance with the On/Off
button 1.
The temperature display 4 indicates
the selected temperature. Displays 3
"cold+fresh" come on.
The appliance starts to cool, the light is
switched on when the door is open.
We recommend a setting of +4 °C.
Perishable food should not be stored
above +4 °C.
Operating tips
After the appliance has been switched
■
on, it may take several hours until
the set temperature has been
reached.
Do not put any food in the appliance
beforehand.
While the refrigeration unit is running,
■
water droplets or a thin layer of ice
may form at the rear panel of the
refrigerator. This is nothing unusual.
It is not necessary to scrape off
the frost or wipe off the water droplets.
The rear panel defrosts automatically.
The condensation flows into
the evaporation area of the appliance
via the condensation channels and
the drainage hole.
The partition in the lower "cool-fresh"
■
container is required for functional
reasons and should not be removed.
The temperature behind the partition is
lower than in the front area of the
container.
24
Setting the
temperature
Fig. 2
Refrigerator compartment
The temperature can be set from
+3 °C to +8 °C.
Keep pressing temperature setting
button 2 until the required refrigerator
compartment temperature is set.
The value last selected is saved.
The set temperature is indicated
on display 4.
Cool-fresh compartment
Fig. 1/B
The temperature in the "cool-fresh"
compartment has been set to almost
0 °C at the factory and should not be
changed if at all possible.
If frost forms on the refrigerated food,
the temperature can be increased. (See
chapter "Eliminating minor faults
yourself".)
Usable capacity
Information on the usable capacity can
be found inside your appliance on
the rating plate. Fig. 0
Table of Contents
