Conduit Entry; Field Communicator Connections - Emerson Rosemount 648 Reference Manual

Reference Manual

00809-0200-4648, Rev BB

3.3.3

Upon installation, ensure that each conduit entry is either sealed with a conduit plug using

approved thread sealant, or has an installed conduit fitting or cable gland with appropriate

threaded sealant.

Figure 3-2. Conduit Entry

A

A. Conduit entry

3.4

The power module needs to be installed in the device for the Field Communicator to

interface with the Rosemount 648 Wireless. The Field Communicator connections are

located on the terminal block. To communicate to the transmitter, begin by removing the

power module-side housing cover, indicated as "Field terminals" by text located on the side

of the device. This will expose the terminal block and HART

Next, connect the Field Communicator to the COMM port connections on the terminal

block and connect the power module to supply the power for configuration.

This transmitter uses the Black Power Module; order model number 701PBKKF. The power

module is keyed and can only be inserted in one orientation. Field communication with this

device requires a HART-based Field Communicator. Refer to

connecting the Field Communicator to the Rosemount 648 Wireless.

Figure 3-3. Connection

1

2

P/N 00753-9200-0020

3

COMM

4

Installation

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

A

Installation

July 2016

®

Communication terminals.

Figure 3-3

for instructions on

29