To Connect The Space Cooling/Heating On/Off Output - Daikin ETVZ16S18EA6V Installer's Reference Manual
Hide thumbs
Also See for ETVZ16S18EA6V:
- Operation manual (24 pages) ,
- User reference manual (68 pages) ,
- Installation manual (40 pages)
Table of Contents
9.3.7 To connect the space cooling/heating ON/OFF output
EPRA14~18DAV3+W1 + ETVZ16S18+23EA6V+9W
Daikin Altherma 3 H HT F
4P644739-1 – 2021.02
B
A
B
a Installation of EKRP1HBAA is required.
b Prewiring between X2M/7+9 and Q1L (= thermal protector backup heater). Do NOT
change.
3 Fix the cable with cable ties to the cable tie mountings.
INFORMATION
Cooling is only applicable in case a conversion kit (EKHVCONV*) is installed.
Wires: (2+1)×0.75 mm²
Maximum load: 0.3 A, 250 V AC
—
1 Open the following (see
1 Top panel
2 User interface panel
3 Upper switch box cover
2 Connect the space cooling/heating ON/OFF output cable to the appropriate
terminals as shown in the illustration below.
2
1
X2M
7
9
A4P
Y2
YC
b
7
9
X2M
A4P
a
"7.2.5 To open the indoor
1+2
Wires connected to the space
cooling/heating ON/OFF output
3
Wire between X2M and A4P
A4P
Installation of EKRP1HBAA is
3
required.
9
Electrical installation
|
4
unit" [
55]):
1
Installer reference guide
3
2
105
Table of Contents
