Table of Contents
5.1.19
inLicenseKey
This input is used for licensing the SIMOCRANE ESSM Step 7 library. The input is an array [1..2]
of the type "String" with 32 characters each. License key 1 must be entered in "inLicenseKey[1]".
License key 2 must be transferred for "inLicenseKey[2]". If the license keys are swapped, the
licenses will be rejected as invalid.
Table 5-39
Input
inLicenseKey
Table 5-40
inLicenseKey.inLicenceKey
Input
inLicenseKey.inLicense‐
Key[1]
inLicenseKey.inLicense‐
Key[2]
inLicenseKey.inLicense‐
Key[3]
inLicenseKey.inLicense‐
Key[4]
Figure 5-6
5.1.20
inHWAddr_Head
"inHWAddr_Head" inputs are of the type "HW_Device". The system constants of the SINAMICS
DCP head stations must be entered here. If you are using the example application, these
addresses are already correctly preconfigured (see figure below).
Figure 5-7
SIMOCRANE Energy Storage System Management V01.01
Operating Instructions, 04/2023, A5E51573536B AE
inLicenseKey
Name
Data type
inLicenseKey[1]
String[32]
inLicenseKey[2]
String[32]
inLicenseKey[3]
String[32]
inLicenseKey[4]
String[32]
LicenseKeys
HWAddr_Head_1
Data type
Array[1..2] of String[32]
Higher-level da‐
ta type
inLicenseKey
inLicenseKey
inLicenseKey
inLicenseKey
Block interface
5.1 Inputs
Comment
-
Comment
License code no. 1
License code no. 2
License code no. 3
License code no. 4
53
Table of Contents
