Before working inside your computer........................4 Safety precautions............................... 5 Electrostatic discharge—ESD protection......................... 5 ESD field service kit ..............................6 Transporting sensitive components........................... 7 After working inside your computer...........................7 2 Installing the Dell ultraspeed drive duo card....................8 3 Getting help..............................13 Contacting Dell..................................13 Contents...
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
Due to the increased density of semiconductors used in recent Dell products, the sensitivity to static damage is now higher than in previous Dell products. For this reason, some previously approved methods of handling parts are no longer applicable.
It is recommended that all field service technicians use the traditional wired ESD grounding wrist strap and protective anti-static mat at all times when servicing Dell products. In addition, it is critical that technicians keep sensitive parts separate from all insulator parts while performing service and that they use anti-static bags for transporting sensitive components.
Transporting sensitive components When transporting ESD sensitive components such as replacement parts or parts to be returned to Dell, it is critical to place these parts in anti-static bags for safe transport. Lifting equipment Adhere to the following guidelines when lifting heavy weight equipment: CAUTION: Do not lift greater than 50 pounds.
Installing the Dell ultraspeed drive duo card Follow the procedure in Before working inside your computer. NOTE: System sounds an alarm for 4 seconds and shut down if top cover is removed while the system is running. The system will not power on if the top cover is removed.
Page 9
Holding the blue contact points remove the raiser1 module from the system. Pull the release tab [1] to open the riser1 slot and lift out the riser2 blank from the slot. Installing the Dell ultraspeed drive duo card...
Page 10
Press the release latch on the Zoom card cover [1] and lift the cover open [2]. Remove the one (M2x2.5) screw [3]. b Insert the SSD card into the slot on the module [1], Replace the one (M2x2.5) screw [2] that secures the SSD card and close the module cover [3]. Installing the Dell ultraspeed drive duo card...
Page 11
Align the top cover tabs with the slots on the system chassis [1] and slide it into the slot. NOTE: Ensure that all internal cables are routed correctly and connected before securing the top cover. b The release latch automatically locks the top cover to the system. Installing the Dell ultraspeed drive duo card...
Page 12
Follow the procedure in After working inside your computer. Installing the Dell ultraspeed drive duo card...
Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: Go to Dell.com/support.