Table of Contents
Available languages
Available languages
R When registration is complete,
Note:
R To cancel without registering the
sensor, press M
on the sensor again.
R If registration fails, the hub sounds
several short beeps.
Using the app
When you register the window/door
sensor by using the [Home Network]
app, you can assign a name to your
devices and group them by location.
For more information, refer to the
User's Guide (page 16).
Changing the sensor
type
You can select whether a window/door
sensor functions as a window sensor or
as a door sensor. For more
information, refer to the User's Guide
(page 16).
For assistance, visit www.panasonic.ca/english/support
HNS101C_(en_en)_0117_ver.201.pdf
the hub sounds one long beep.
N on the hub and
9
Wireless
communication
range
The wireless communication range of
each device in the system from the hub
is approximately 50 m (160 feet)
indoors and approximately 300 m
(1,000 feet) outdoors. Wireless
communication may be unreliable
when the following obstacles are
located between the hub and other
devices.
R Metal doors or screens
R Walls containing aluminum-sheet
insulation
R Walls made of concrete or
corrugated iron
R Double-pane glass windows
R Multiple walls
R When using each device on
separate floors or in different
buildings
Note:
R You can check the window/door
sensor's communication status by
pressing M
N. If the LED indicator
is lit in green or red, the sensor is
communicating properly with the
hub. If the LED indicator blinks in
red, it is out of range of the hub.
Setup
9
2017/01/19
20:21:04
Chapters
Table of Contents
