Table of Contents
9. Remove this machine from the host machine.
CAUTION:
Do not slide the Inner Finisher as putting it on the host machine or bump the edge parts of the rail unit to the covers of the
host machine.
It may cause damage to the host machine.
● Checking after Assembly
1. Install the finisher in the host machine.
2. Turn the host machine on.
3. Open the finisher front cover.
4. Check that the stapler unit [1] is at the staple cartridge replacement position as shown in the figure.If it is, close the
finisher front cover to complete the check procedure.
4. Parts Replacement and Cleaning
[1]
54
Hide quick links:
Table of Contents
