SONY
QUICK SETUP GUIDE
Channel Scan Options
Clear Channel Scan
When performing any frequency scans, the audio transmission is interrupted. Powering on the receiver and holding
Plus (+) shortcuts the Rx to complete a clear channel scan of the frequency block it was last in. It will then display
optimum frequencies, with the lowest detected RF noise. Once chosen, press 'Set' to change the frequency of the
Rx (and of the Tx if a CrossRemote is set up).
QL
RX1
3818 CLR
608.250MHz
Auto Scan/Sync
Holding 'Menu Select' and 'Set' at any time brings up the 'Auto Scan/Sync' function. This performs a scan of the
entire frequency spectrum of the receiver and finds the best 1 or 2 frequencies available (depending on how many
Crossremote paired Txs are available). Once found, the Rx can deploy both frequencies for any paired transmitters
(up to 2).
K
DWX
Slot-In Bundle
UTILITY
AUTO SCAN/SYNC
START? YES
UTILITY
TX STATUS
SLEEP...
UTILITY
2133 SCAN...
474.625MHz
UTILITY
1: 470.625MHz
2: 471.125MHz
Contact Karno Sound for 24hr support:
07747515123 | 07715103222 | 07952129649
Email : [email protected]
Key Features:
QL
RX1
3810 0dB uV
607.250MHzSET
QL
RX1
GPCH Send TX?
YES
UTILITY
SET FREQUENCY?
RX1-TX1/RX2-TX2
UTILITY
WAIT...
UTILITY
1: COMPLETE
2: COMPLETE
7.
