SONY
QUICK SETUP GUIDE
Sound Devices Superslot™ Display
Frequency (selectable)
Antenna in use
RF History
Freq. Groups
Superslot™ Tx Options Menu
*Crossremote™ connection needs to be established for below control see page 4.
1. Power Save – Allows Tx to go in and out of Sleep mode
2. +48V Phantom – Only applicable to DWT-P01N Plug-On
Transmitter
3. Button Lock – Disable Settings and/or Power switch on Tx
4. Attenuation – Real-time control of Tx attenuation in 3dB steps
from 0dB to 48dB. Attenuation is a negative figure, the higher the
number, the quieter the signal will be
5. Low Cut Filter – Real-time control of LCF up to 220Hz
6. RF Power – Switchable 2/10/25mW power. (25mW has to be
enabled on Tx as an option)
7. Sync Band/GP/CH – If a change in frequency is made to the Rx,
this control sends the 'Change Frequency' signal to the Tx
8. Sync Codec Mode – If a change in Codec mode is made to the
Rx, this control sends a 'Change Codec' signal to the Tx
K
DWX
Slot-In Bundle
Tx Name
A1: Sony DWR-S03D [TX 1]
-50
-35
B 610.125
GR:
D4
RF Clear Scan
TV Channel Block
Contact Karno Sound for 24hr support:
07747515123 | 07715103222 | 07952129649
Email : [email protected]
Quality Level
-20
-12
0
QL
Key Features:
2mW
Tx
TV38
CH:
3833
Tx Options
Rx Options
Tx RF Power
CrossRemote Level
Tx Battery Level
Individual frequency
channel within Group
A1: Sony DWR-S03D - Tx Options
1.
Power Save
2.
+48V Phantom
3.
Button Lock
4.
Attenuation
5.
Low Cut Filter
6.
RF Power
7.
Sync Band/GP/CH
8.
Sync Codec Mode
Active
Unlock
0 dB
Off
2mW
5.
